sundownz
Pro Seller
Supporting Vendor
* Front door before deadening
* Front door after deadening. Edead V1SE(2) mat used for inner and outer door sheet metal. Outer sheet metal has 2 layers on all, and 4 layers directly behind the speaker with Edead V4 Teklite on top to absord midrange reflecction. Edead V4 used again to prevent the metal rods from rattling.
* Rear area with interior removed
* Edead V3 liquid deadener applied, Edead V1SE(2) mat deadening will be applied on top of this. I bought the V3 with no real planned use for it so I'm slopping it on the floor of the Civic just to use it for something //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
* Starting to deaden inside side cavity, these cavities will be filled with expanding foam after the outter sheet metal has been fully deadened. Peel & Seal is being used for the outter skin deadening.
* Rear hatch door deadening started
The roof will be deadened using Second Skin Damplifier. I'm ordering that in the next few days. It's my favorite overall deadener but a little too expensive for me to do my whole car with.
Thats it so far... I have alot more work to do so pics will be added as I move along. This will be the demo vehicle for Sundown Audio when it's ready. I intend to supercharge it so I can actually drive regular speed with the extra weight from deadening and the upcoming system =)
