System for my girls ford focus

[darkdrake 10+ year member]

ok heres what im wanting to do. my girlfriend has a 2000 ford focus and for her birthday ive been wanting to get her a system. ive been looking a 2 10 inch comp vr's cause i know i had some before and they sounded pretty good. so with that said.

heres the specs on the comp vr's

* Model CVR10

* Outer Frame Diameter, in (cm) 10 11/16 (27.1)

* 10" sub with dual 2-ohm voice coils

* Power Handling Watts, Peak 600, (RMS 300)

* Sensitivity 85.5 db

* frequency response: 25-500 Hz

* Mounting Depth, in (cm) 5 7/16 (13.8)

* double-stitched, foam-ribbed Santoprene rubber surround

* Hole Cut-Out Diameter, in (cm) 9 1/4 (23.5)

* Equivalent Volume [Vas], ft3 (L) 1.42 (40.24)

* Net Displacement, in3 (cc) 75.3 (1234)

* Moving Mass [Mms], oz (g) 4.14 (117.3)

* Magnet Weight, oz (kg) 43.23 (1.226)

i have a sealed enclosure already i can put them in. just wondering what you all think and what kind of amp should i get. im looking for something from hifonics.

Click to read more...

 

[negativezeroz 5,000+ posts]

some ideas:

http://sonicelectronix.com/item_5902.html

http://sonicelectronix.com/item_1491.html

http://sonicelectronix.com/item_2748.html

 

[darkdrake 10+ year member]

so if the are dual 2 ohm like it say i could hook 2 of them up as a .5 or 4 ohm load correct. i know i have my 2 12 inch l5's hooked up to a 1 ohm load and they sound pretty **** good. there being pushed by a hifonics amp.

so should i try to find some cvr's with dual 4 ohm or stick with the 2.

 

[negativezeroz 5,000+ posts]

Dual 2 u can wire to 2ohm or 8ohm.

D4's you can wire to either 1 or 4.

 

[darkdrake 10+ year member]

so which load would sound better.