Suggest me a size for my MT 15"....

[NeverEnuffBass 10+ year member]

There are quite a few DB Drags comming up in my area and since my Durango's wall is going to be completely ripped out and rebuilt, I need something to compete in Street B and Bass race with. My Blazer has an nice cargo area as well as a 255 amp alt. and 2 yellow tops. Since I have 4 MT's and Powerbass XA-3000's I want to use one of each. I'm guessing a 40hz tuning should work well for both SPL and bass race.

Click to read more...

 

[80INCHES 5,000+ posts]

hmmm 4th order bandpass wall with 400 square inches of port tuned to 40hz

or a 6th order bandpass wall with 510square inches of total port area ...the rear having 170square inches tuned to 38hz and the front tuned to 70hz

both should get loud off the power u have.....but if u dont want to go that route...16cubes with 300 square inches of port tuned to 40hz or 32 so it can peak at 40 like your last box did

80

 

[NeverEnuffBass 10+ year member]

hmmm 4th order bandpass wall with 400 square inches of port tuned to 40hz
or a 6th order bandpass wall with 510square inches of total port area ...the rear having 170square inches tuned to 38hz and the front tuned to 70hz

both should get loud off the power u have.....but if u dont want to go that route...16cubes with 300 square inches of port tuned to 40hz or 32 so it can peak at 40 like your last box did

80

I'm only using 1 MT, not all 4.

 

[NeverEnuffBass 10+ year member]

Bump