Sub Wireing

[Wragold 10+ year member]

Is this ok for the negative wire. I cant get it in all the way.

Click to read more...

 

[R0ID_RAGE 10+ year member]

why do you have 2 wires coming out of it?

 

[Tutsola 10+ year member]

probably, but i would give it another go...

you could try to remove som of the copper in each wire, and then solder it together.... this will form a solid and soft lump wich is easy to sculpt...

 

[Tutsola 10+ year member]

why do you have 2 wires coming out of it?

parallell connection?

 

[Wragold 10+ year member]

why do you have 2 wires coming out of it?

 

[Wragold 10+ year member]

probably, but i would give it another go...
you could try to remove som of the copper in each wire, and then solder it together.... this will form a solid and soft lump wich is easy to sculpt...

Yeah I dont have a soldering gun so do you think it will work if i just take off more wire and get it to fit?

 

[Tutsola 10+ year member]

sure, just wind them tight together...

 

[Tutsola 10+ year member]

take more insulation off, remove copper, and make a tightly wrapped straigth line... do this so that you have about 50 % of each wire in the connector.... avoid the V shape on the wires...

 

[Wragold 10+ year member]

i just took off more wire and stuck it back in the hole till it fit. It cant hurt if i take off much does it?

 

[Tutsola 10+ year member]

No, this is fine, as long as it sticks in there....

but try to spread the amount of removed copper even between the two wires....

 

[Wragold 10+ year member]

oh man i just threw it away