Sonnie 10+ year member
Hillbilly
Suggestions on a pair of subs for best SQ… what would you choose?
Common to all choices...
¾” MDF box with 2 X 1ft^3 sealed compartments
(Recommended sealed enclosure for all of these subs is ~1ft^3)
Kicker 600.1 amp birthed at 745 watts RMS @ 2ohms 14.4v
Suggested sub pairs…
(Other suggestions are welcome)
IDMAX 10v3 D2 (10’ Dual 2ohm)
Fs 20.4hz
Qes .416
Qms 2.16
Qts .349
Vas 3.07ft^3/87 liters
Xmax 24.6mm (one way)
Sd 388cm^2
Spl 90.9 (1watt/1meter)/85.9db (2.83v)
Pwr 1000watts RMS
PG Titanium Ti 12 (12” Single 4ohm)
Fs 27.22hz
Qes .438
Qms 6.83
Qts .412
Vas 1.67ft^3/47.25 liters
Xmax 18.1mm (one way)
Sd 490cm^2
Spl 86.5db (2.83v)
Pwr 500watts RMS
IDQ12 D2 V.2 (12” Dual 2ohm)
Fs 19hz
Qes .271
Qms 4.59
Qts .256
Vas 5.04ft^3/143 liters
Xmax 13.5mm (one way)
Sd 530cm^2
Spl 90.2db (1watt/1meter)/NO 2.83v GIVEN
Pwr 350watts RMS
Elemental Designs 13Ov2 D2 (12” Dual 2ohm)
Fs 21hz
Qes .3
Qms 3.3
Qts .28
Vas 6.22ft^3/176 liters
Xmax 18.3mm (one way)
Sd 545cm^2
Spl 89db (1watt/1meter)/NO 2.83v GIVEN
Pwr 600watts RMS
Thanks!
Common to all choices...
¾” MDF box with 2 X 1ft^3 sealed compartments
(Recommended sealed enclosure for all of these subs is ~1ft^3)
Kicker 600.1 amp birthed at 745 watts RMS @ 2ohms 14.4v
Suggested sub pairs…
(Other suggestions are welcome)
IDMAX 10v3 D2 (10’ Dual 2ohm)
Fs 20.4hz
Qes .416
Qms 2.16
Qts .349
Vas 3.07ft^3/87 liters
Xmax 24.6mm (one way)
Sd 388cm^2
Spl 90.9 (1watt/1meter)/85.9db (2.83v)
Pwr 1000watts RMS
PG Titanium Ti 12 (12” Single 4ohm)
Fs 27.22hz
Qes .438
Qms 6.83
Qts .412
Vas 1.67ft^3/47.25 liters
Xmax 18.1mm (one way)
Sd 490cm^2
Spl 86.5db (2.83v)
Pwr 500watts RMS
IDQ12 D2 V.2 (12” Dual 2ohm)
Fs 19hz
Qes .271
Qms 4.59
Qts .256
Vas 5.04ft^3/143 liters
Xmax 13.5mm (one way)
Sd 530cm^2
Spl 90.2db (1watt/1meter)/NO 2.83v GIVEN
Pwr 350watts RMS
Elemental Designs 13Ov2 D2 (12” Dual 2ohm)
Fs 21hz
Qes .3
Qms 3.3
Qts .28
Vas 6.22ft^3/176 liters
Xmax 18.3mm (one way)
Sd 545cm^2
Spl 89db (1watt/1meter)/NO 2.83v GIVEN
Pwr 600watts RMS
Thanks!