Sub issue...

[biggen_bd 10+ year member]

Alright here it is, I currently have a 15" XXX in the truck, but I've decided to go a new route. I have built a box for 2 10" subs to go under the back seat the issue is they each only have .75 cubes of breathing room per chamber and like a little over 5 inches of mounting depth... I'm only used to massive subs (i.e. XXX, Brahma, 9500s, Eclipse Ti, etc.) so where do I go? I have no spending limit and I have two different amps I could use a Memphis 1500w @ 2 ohm or a MTX w/ 1500w @ 1 ohm hit me up with suggestions thanks...

-B

Also, I'd appreciate it if you could put up a link so I know where I can find these drivers

Click to read more...

 

[95BlackGA 5,000+ posts]

FI SSD 10, either voice coil configuration would work.

 

[95BlackGA 5,000+ posts]

Oops, those have a 6" mounting depth.

 

[CrazedCat 10+ year member]

Critical Mass LS102

 

[biggen_bd 10+ year member]

Critical Mass LS102

I said that I don't have a spending budget, but over $800 per sub is a lil too much $ fo' me

 

[mrray13 10+ year member]

soundsplinter rl-i 10s would work nicely, maybe fi ssds. i'd also look at si bms

mainstreme, kicker cvts.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee //content.invisioncic.com/y282845/emoticons/peace.gif.2db28b618ed8d1964ebbe2f5021d2c39.gif