Sub box plans

[Mascola222]

Just wondering if anyone has plans for a 2.0 cu/ft 12 inch sub box I’m a cabinet maker but little out of my realm any help would be greatly appreciated

Click to read more...

 

[shredder2]

I might could help if you follow the sticky thread instructions in... http://www.caraudio.com/forums/enclosure-design-construction-help/560833-about-make-thread-about-box-design-read-first.html ... more info would be best

 

[Mascola222]

Hyundai Veloster

Trunk is empty space is not an issue

Infinity reference 1250w 12 inch sub Manufacture states min/max is 2.0 cu/ft

Ported

I listen to a wide Variety of music rap,metal,hip hop

Just need something simple

3/4 mdf is what I would use

 

[shredder2]

Hyundai Veloster Trunk is empty space is not an issue

Infinity reference 1250w 12 inch sub Manufacture states min/max is 2.0 cu/ft

Ported

I listen to a wide Variety of music rap,metal,hip hop

Just need something simple

3/4 mdf is what I would use

All good info... whats your width so I get a maximum available idea and preferred height? Also, I'd like the actual amplifier/load so I can try to do this right for ya... I can do simple, no problem. I'm assuming a mid 30's tune... correct? Now just lemme look for parameters while you get measurements.

 

[Mascola222]

Rms is 300w

And I have 37x30x18 to work with I don’t want it huge but you can do as needed to get the 2.0

 

[shredder2]

Rms is 300wAnd I have 37x30x18 to work with I don’t want it huge but you can do as needed to get the 2.0

No problem, looks like it'll be single baffled, 15"H x 34"W x 14.25"D... about 35hz tuned, sub and port back if that works for you. Lemme know and I'll send ya a PM when I whip it up.

 

[Mascola222]

Sounds great thank you so much

 

[shredder2]

PM sent

Resized it a little... should work fine.