Strapable 1Kw rms mono amps @ 1ohm?

[ThxOne Premium Member]

4 subs - Dual 4ohm VC's. 500w rms per sub. 2000w rms total. All 4 wired together would drop to half an ohm. Not ideal. So the idea of twin 1ohm 1000w rms amps comes up. I like this idea as 1000w amps are more easily obtained financially. So what would be the best suggestion for a linkable amp that would automatically mimic the settings on the main/master amp?

Click to read more...

 

[BCotrell]

Your going to have box rise so why not go bigger on an amp that wires to .5? Doesn’t the taramps bass series wire down to .5? Maybe a 3k?

 

[Popwarhomie 5,000+ posts]

You have many .5 and 2 ohm options from Taramps.
Bass line at .5
Md line at 2 ohms.

 

[Jeffdachef 5,000+ posts]

Taramps Md 1800.1 2 ohm version cheaper than two 1000 rms amps. Dont strap, too many downsides in phase, rise, strain on the slave amp etc... Strapping is just garbage.

 

[THATpurpleKUSH 5,000+ posts]

Dont strap, gain match instead or find something .5ohm stable or higher power 2 ohm rating

 

[ThxOne Premium Member]

Ok. Cost is the main reason for not wanting to get a huge single channel amp but I recon sometimes you just gotta do it. Plus, all the "linkable" amps I looked at were 1 ohm stable but not when strapped. They were only two ohm stable. I am sure there are reasons for it. So... Taramps huh? Then we are looking for 2000w @ 2ohm. Let me go see what they offer. Thanks guys.

 

[ThxOne Premium Member]

Taramps MD 1800.1

 

[Popwarhomie 5,000+ posts]

MORE POWER! Do atleast the the MD3k 2 ohm. I would do the 5k personally.

 

[Jeffdachef 5,000+ posts]

Taramps MD 1800.1

yes thats 1800.1 at 12.6 volts. 12.6 volts! now look at the dyno at 14 volts.

 

[ThxOne Premium Member]

yes thats 1800.1 at 12.6 volts. 12.6 volts! now look at the dyno at 14 volts.

That's the video I watched that made me go

That is amazing for how little it is and how little it cost.

 

[Popwarhomie 5,000+ posts]

Converting another to the Taramps Team