Static, gotta hate it. New install. How to diagnose? ITS LOUD!

[WOT]

Just started installing my 2 new set of Pheonix gold RSD 6.5 components, tonight I only had time to run all the speaker wires and connect 2 of the tweeters, and both are giving off HEAVY static, that increases when you turn up the volume, but starts becoming audible at like volume 10, and very heavy at 20+

All the other speaker connections are left unconnected but these 2 tweeters are hooked up to my 4 chanel amp, gains turned almost right off, full pass, great grounds, good twisted connections at those tweeters

My deck is a premier 860mp and I have my rear fill running off of the deck and they sound perfect.

I should maybe mention that Im running 2 sets of RCA's to my speaker amp, one coming off the "MIDS" rca output off the HU and one coming from the "HIGH" rca output from the HU, dunno if that matters.....

Im gonna carry on and install the door pod with the rest of the speakers and tweeters tomorrow, I dont know if they will be making the same noise or not but I hope not.

Any input would be greatly apprecaited

thanks

Click to read more...

 

[WOT]

should probably mention that I already checked polarity, they were wired correctly the first time but I still tried to reverse them at the tweeter and it made the same noise, sounded exactly the same

 

[CRXBMPN 5,000+ posts]

are any of your speaker wires shorting out? i've had similar problems when one of my speaker wires was grounding to metal on accident...

 

[silvercookie 5,000+ posts]

usually the more you turn up the volume the louder it gets //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[WOT]

ya the noise does increase when i turn up the volume, like I said

And for conections grounding out, I dont think any are, solid connections from my amp to my crossover board (have them all screwed side by side), then I ran all my wires with new wiring under the carpet and through a gromnet into the door. Like I said only 2 connections were made for the tweeters, and the rest of the wiring is left hanging in the air with no exposed wire

dunno if I should comintue or not with the install or fix this problem first tomorrow, need ideas though

 

[silvercookie 5,000+ posts]

just saying it is common sense that music gets luder as you turn up the volume.

 

[WOT]

Well I meant the static noise obviously, as it does make a difference in diagnosis as to if the noise level stays the same or increases

 

[WOT]

re-did the amp and headunit ground, no worky, im out of light, need more help

 

[WOT]

fixed, substage amp power wire was to close to my crossovers! was almost 2" away aswell, moved it another inch, gone

 

[energizedsbs 10+ year member]

fixed, substage amp power wire was to close to my crossovers! was almost 2" away aswell, moved it another inch, gone

very nice.. glad you got it taken care of..

 

[califrog310 10+ year member]

Screw this P.O.S he's a **** thief and coward

 

[jrwalte 10+ year member]

Screw this P.O.S he's a **** thief and coward

Yeah. That's definitely the way to handle it and we'll absolutely listen and believe you.