speaker wiring

[rocky 59 5,000+ posts]

i have some infinity refernce coxials in my dash and what to amp them. how would i wire them in a 2 channel amp to 4 ohms? if it helps its a kx 100.2 and the speakers are 45 rms and the amp gives out 35 @ ohms. thanks for your help

Click to read more...

 

[PhatTonyDeMarco 5,000+ posts]

You do not wire the amplifier, you wire the speakers... What are the coil configs on the speakers?

 

[rocky 59 5,000+ posts]

how would i connect them to the amp @ 4 ohms is what i mean.

 

[PhatTonyDeMarco 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif Again.. You do not connect the amp at any impedance load.. You connect the speakers. In order to do this, you need to tell us the coil set up on your speakers... Not all speakers can be wired to a final 4 ohm load. Either you are an idiot, or are just not asking the correct question.

Maybe you are asking how to bridge the amp with a 4 ohm mono load?

 

[rocky 59 5,000+ posts]

hey dude chill out with the idiot shit okay. just trying to get the question answered. so here

2-Way Speaker Specifications

Size: 4 x 6

Sensitivity: 91 dB

Frequency Response: 72-21,000 Hz

Recommended RMS Power: 45W

Peak Power Handling: 135W

Impedance: 4 ohms

 

[alphakenny1 10+ year member]

just connect speakers to the wire terminals of the amp and that will have a final impedance of 4 ohms.

 

[rocky 59 5,000+ posts]

i would want to use a channel per speaker correct? just checking

 

[JimJ 5,000+ posts]

Yes - the owner's manual should have a decent graphic with the wiring layout.

 

[rocky 59 5,000+ posts]

k thanks guys all needed.

 

[nas786 10+ year member]

Either you are an idiot, or are just not asking the correct question.

wtf???

 

[Alpineinstaller 10+ year member]

wtf???

yeah i know he was the idot.

 

[rocky 59 5,000+ posts]

i didnt know what that was all about.