Speaker sensitivity

  • 3
    Participant count
  • Participant list

dearborn_tark

CarAudio.com Newbie
Hi, I have some alpine spr-136a 2-way component speakers along with a stereo that outputs 14w rms. The woofers are so quiet that you have to put your ear up to them to confirm that they are on when 75% max volume. I looked up the sensitivity of the alpines to find that they are 85db sensitivity. Could the power output of my stereo be the reason? If I hook up other speakers with 89db sensitivity, they work pretty normally, although not deafeningly loud. Is the stereo output my problem, and what stereo power output would make the alpines perform?
 
Look at the spec. sheets for your speakers. That should help you with the nominal power requirements. Also, be aware that rated RMS of stereo units may not always be accurate. Have you considered a separate amplifier to drive the speakers?
 
Hi, I have some alpine spr-136a 2-way component speakers along with a stereo that outputs 14w rms. The woofers are so quiet that you have to put your ear up to them to confirm that they are on when 75% max volume. I looked up the sensitivity of the alpines to find that they are 85db sensitivity. Could the power output of my stereo be the reason? If I hook up other speakers with 89db sensitivity, they work pretty normally, although not deafeningly loud. Is the stereo output my problem, and what stereo power output would make the alpines perform?

85 db sensitivity is pure garbage lol. 89 db sensitivity is below average. 90 to 92 is the standard for any decent level of loudness. Its not your stereo even though more power would help slightly, considering your speakers are 40 rms max, you cant put a an amp on them and expect more results because only with 10x the current power at 85db sensitivity would it result in real gains across the board but the speaker wont handle that. If it was rated 100 rms then yeah throw an amp. But with what you got, its kinda shitty.

I'd actually just recommend ditching them. Get some Polks or hertz or infinity components, they are all around 92+ Grab a cheap pioneer 100rms x 4 channel gm series amp as well.
 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

True but at those prices, nickel plated copper or brass would be a much better option for speakers, no point in using stainless steel at all...
24
354
dragon.breath, Many thanks for taking the time to help me out. It is very much appreciated and my small brain can understand it now. I have...
6
234
Drill a hole and use the proper protective split loom and hole grommets to keep the outer speaker jacket from knicks and cuts, give just enough...
8
760
I'd be willing to pay for a quality HU, if it meant that I can truly get the sound quality I need. I've seen some aftermarket ones that look...
10
780

About this thread

dearborn_tark

CarAudio.com Newbie
Thread starter
dearborn_tark
Joined
Location
dearborn
Start date
Participants
Who Replied
Replies
2
Views
837
Last reply date
Last reply from
Jeffdachef
PXL_20240402_191130047.jpg

winkychevelle

    Apr 26, 2024
  • 0
  • 0
IMG_1052.jpeg

GoldCountryCA

    Apr 26, 2024
  • 0
  • 0

Latest topics

Top