sound right?

[.::DuD3::. 10+ year member]

i'm going to be running 2 ga from the battery to a distro block, but i can't find any blocks accepting 2 ga. does it have to be accepting 2 ga, or can i use something like this:

http://knukonceptz.com/productDetail.cfm?prodID=PB-2044

Click to read more...

 

[ANeonRider 10+ year member]

Ya, you can use anything that will accept larger wire. Why 2 gauge though? Might as well use 1/0 while your at it, and its not that much more $$$.

 

[.::DuD3::. 10+ year member]

well i was thinking, because i already have a 10 ga kit for my comp's amp, and a 4 ga kit for my sub's amp, would it be easier just to do 2 seperate wires from the battery?

 

[ANeonRider 10+ year member]

How easy is it to run a cable from the battery into the cabin? It wouldn't be that bad if you use some electrical tape and tape the two together.

 

[.::DuD3::. 10+ year member]

i dunno, thats what i think. people just make it out that distroblocks are much easier to wire to than just 2 seperate wires...but thanks for the help!

 

[ANeonRider 10+ year member]

Well, less things to go wrong, less wires, less headache.