Some Wall Help plz

[nate2587 10+ year member]

If you look close at the second picture you can kinda see behind the faceplate but it is empty back there.

I know im losing a ton of pressure back there so i was trying to think of what i could do to help seal it up?

Expanding Foam?

Insulation?

etc... what would be my best option?

Click to read more...

 

[nate2587 10+ year member]

bump

 

[themommyvan 10+ year member]

build the wall so it conforms to the car.

 

[Chuck88 10+ year member]

Other - Better trim pannels.

 

[nate2587 10+ year member]

Other - Better trim pannels.

even with better trim panels i dont think its going to seal it off properly

 

[fbi90909 5,000+ posts]

cement?

 

[nate2587 10+ year member]

cement?

i'll pass not that desperate

 

[fbi90909 5,000+ posts]

not really a desperate measure. but if you were to make a sandwhich of a back board of ply wood or so and put cement maybe 2-3" thick up to the baffle board would create a soild baffle and if done right it should seal up with the trim of the car.

lol but i really know nothing of competeing so don't take my word for it.

 

[iamamp3pimp 5,000+ posts]

nothing.

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[nate2587 10+ year member]

nothing.
//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

isn't it losing pressure back there because its not sealed off? kinda like sealing off the trunk of a car

 

[themommyvan 10+ year member]

I used 2x4s with mdf on the front to make it look smooth. Not done yet but you get the idea.

 

[iamamp3pimp 5,000+ posts]

get carpet padding from new houses/apartments

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[twisztdauthorit 10+ year member]

fiber glass it?

 

[iamamp3pimp 5,000+ posts]

dont glass it. when it flexes it will justpop off.

its not losing that much pressure,

this is a DD, right?

 

[iamamp3pimp 5,000+ posts]

i have some gaps in mine....so what..

one thing you can do is get some pipe insulation foam, cut a slit in it (just like the old pads on early 90's bicycles)and push that shit on all the way around the trim panel.