rim help?

[dan69372 10+ year member]

i have a 1995 hona civic dx coupe 2door

I want to first thing anyone know if 17's will fit with out hiting fender...low profile tires

what size rims should i get?

Click to read more...

 

[Prowler573 5,000+ posts]

17s should fit fine.

Your bolt pattern is 4 x 100mm by the way if you didn't already know. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[dan69372 10+ year member]

how you find that out?

by the way here is a picture

http://pg.photos.yahoo.com/ph/danny_danny_69/detail?.dir=5b46scd&.dnm=3198scd.jpg&.src=ph

theres 13's on it now

 

[Prowler573 5,000+ posts]

how you find that out?by the way here is a picture

http://pg.photos.yahoo.com/ph/danny_danny_69/detail?.dir=5b46scd&.dnm=3198scd.jpg&.src=ph

theres 13's on it now

One way is to use the rim sizing chart available on several websites.

Another way (for me) is knowing that there are many, many cars that use that same bolt pattern. Toyotas, Hondas, some 4-lug Fords, many Saturns, etc.

The car that I drive, a 1995 Geo Prizm, has that same bolt pattern. My OEM wheels were 14s but i have 17s on it now.

According to the wheel sizing chart on http://www.DiscountTireDirect.com your car can fit up to 20s....but I would imagine some sort of body lift would have to be made for them not to rub.

If you go with 17s, which I know for a fact will fit without rubbing without needing any other mods, the tire size you are going to want to use is the same as mine (to keep your speedometer reading and gear ratio intact as stock) 205/40HR17

 

[dan69372 10+ year member]

could u get on yim plz

 

[Prowler573 5,000+ posts]

Same username as on here //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif