Well, I got a 52" Rear Projection HDTV a while back. The convergence on it was messed up, so I did my tweaking when I first got it, and it was turned into shit... Couldn't tell what was going on at all. I spent about a month messing with it, and no with no luck, it was still unwatchable. I figured I wouldn't make it too much better since I know nothing about projection systems. I moved, and had a little 27" T.V. on a huge bare wall. So, I decided to try my luck, and decided to work on the t.v. again, just before I decided to sell it. To my amazement, I got a decent picture. It's not the best, as I am still tweaking the picture tubes, and convergence. The convergence setup on the unit sucks. What I'm wondering if there is anyone here, that can recommend what I do to fix the convergence for very fine tuning, or can you direct me to someone who can?
Pictures :
Just before I quit messing with it the first time :
This is the picture now :
As you can see, the blue is a little off, and what you can't see is that the red is off a little too. I've done all I can think of to try and remedy this, but no luck so far.
Pictures :
Just before I quit messing with it the first time :
This is the picture now :
As you can see, the blue is a little off, and what you can't see is that the red is off a little too. I've done all I can think of to try and remedy this, but no luck so far.
