Danielg135
CarAudio.com Newbie
Hello,
My first post here. I recently purchased a 12inch active subwoofer.
I have to my understanding set everything up correctly.
I have a Sony MEX-N5100BT head unit and wired the blue remote wire onto the blue/white striped REM out wire.
When the radio is switched on the amp does not switch on.
I have checked using a multimeter the continuity of the positive cable and have power to the subwoofer and continuity across the remote cable.
From the head unit the blue/white striped wire had a negative polarity of -0.4v which seemed bizarre.
Head unit works fine with speakers and everything else.
Just not quite sure what to do. Is it an issue with the head unit, the wiring loom etc....
Any advice much appreciated!
My first post here. I recently purchased a 12inch active subwoofer.
I have to my understanding set everything up correctly.
I have a Sony MEX-N5100BT head unit and wired the blue remote wire onto the blue/white striped REM out wire.
When the radio is switched on the amp does not switch on.
I have checked using a multimeter the continuity of the positive cable and have power to the subwoofer and continuity across the remote cable.
From the head unit the blue/white striped wire had a negative polarity of -0.4v which seemed bizarre.
Head unit works fine with speakers and everything else.
Just not quite sure what to do. Is it an issue with the head unit, the wiring loom etc....
Any advice much appreciated!