Rear stage and deadening question

[BoostedSC 10+ year member]

I am rebuilding my set up in my SC300. So far it is as goes

Kenwood DDX 8019

PPI PC 450 bridged

PG RSD 6.5

PG XS2300 bridged

Boston Pro 12

I am wanting to do something for a rear stage for some fill. It will be powered by an old Coustic 160U (35x2) should I get another set of RSDs since they are pretty cheap or just get some 30$ coaxials?

On the deadening front I have been considering doing the entire car with something. I have been looking at Raamma or Damplifier and was wondering if the Spectrum paste is as good as the Damplifier

Click to read more...

 

[BoostedSC 10+ year member]

Any suggestions?

 

[Anthony Collova 10+ year member]

Spectrum Sludge can be as good as Damplifier but you need to lay it on pretty thick. About 20% thicker than the damplifier to get similar results.

Whether you use Spectrum or Sludge, the results will be nearly identical since they are the same product with only 6 ouces of liquid sperating them.

Hope that helps

ANT

http://www.damplifier.com