RE Sub "PLEASE READ"

[teqnek 10+ year member]

since you have a dual 4ohm sub. i dont think you'll be getting the most out of your amp which is rated at "180watts @ 4ohms" you can only wire at 2ohm or 8ohm load. anyone please correct me if im wrong.

 

[richgonfishn 10+ year member]

Here is what their going with. The only thing is this years model will be here in a week or so. They suggested I wait the week and get the newest MTX 311D.

What are your thoughts?

Thunder311D Class D Amplifier

This subwoofer amplifier features MTX Audio's Adaptive Class D Technology for large power numbers from a very small footprint. Thunder311D features an 18dB/octave low pass crossover, fixed at 85Hz, this amp also contains both the Thunder EQ bass boost and RCA outputs for daisy chaining multiple amplifiers. Our "Smart Engage" auto-turn-on circuit makes installation easy.

Download Owner's Manual in PDF form.

Download the Quick Install Sheet in PDF form.

Specifications

RMS Power 12.5 VDC Input

Hi Level w/ Smart Engage

Low Level Input

Crossover(s)

Low Pass @ 85Hz - Fixed

Thunder EQ

RCA Output

Full Range

2 Ohm Load 200 w x 1

4 Ohm Load 100 w x 1

Dynamic Power 14.4 VDC

2 Ohm Load 310 w x 1

4 Ohm Load 155 w x 1

Dimensions (with ISO Feet)

8" x 9.75" x 2.1"

20.4cm x 24.8cm x 5.3cm

 

[ngsm13 5,000+ posts]

200 wrms @2ohms mono! Excellent!

NG