RE 15" SX Box Design

[voodoochilde87 10+ year member]

I'm in the process of designing a box for my RE 15" SX to be powered by an audioque 1200D. It is going in a 95 civic coupe (obviously not the ideal vehicle, but its what I got) with crescendo components and their 4 channel amp already installed.

I plan on building a simple square port box and was hoping that somebody could give some comments on the box designs I have come up with. Being its going into a civic trunk I am limited on space and have at MAX 32 inches width, 17in height, and 18 depth. I am looking to for box to be tuned somewhere between 30-35hz. Anyhow, this is my first actual box construction so I was looking to see if you all thought of these designs. Thanks.

Click to read more...

 

[voodoochilde87 10+ year member]

bumpity bump...c'mon now, isn't there somebody that can at least give me some feedback? I feel like the port is very narrow, but that's what it requires in order to tune it where I want. Do you think I'd be better off with a round port? What do you guys think?

 

[813thumper 10+ year member]

box is too small and port is too small.

try ~4 cubes at 34hz with about 52sq in of port