RATTLING!!! Need help
- Thread starter JLAudioEXTREME
- Live activity
- Replies 5
- Views 882
perhaps line the part that is rattling with foam. for example if it is the licensse plate that rattles then put foam behind it to get it to stop. and tighten any bolts that may be loose like rangerman said.
yo! I stopped all rattle in a 95 coupe mustang of my friend!
with no dynamatting!!!!
no money involved.
the biggest rattle ***** on that mustang is the rear deck panel hitting the window, this I guarentee, we found a 1" by 1" by 48" foam strip, and we simply shoved it into that crack with a penciland screwdriver.
then we had major trunk rattle, we got towels, more foam we found laying around, and so forth, and we shoved it up into the top or that, then used another layer of foam stuff that was dark dray to make it look somewhat neat, it is kinda pushed out by an inch past the metal, but it looks nice, and no shiny dynamat.
now we get NO rattle anywhere, we had problems with the doors, but we took them off when installing some nice infinity kappa coaxials, and we put some silicone glue around each and every loose plastic peice, then it was all gone.
no rattle!!! except when the system reached an excess of 143+ dB, then the trunk has a low pitch rattle, but nothing high pitch to lower sound, or dB.
hope this helps, if you'd like pictures of anything, just email the mustang owner at justin123456789@hotmail.com, he'll send you pictures soon enough if you are polite in asking.
lata.
with no dynamatting!!!!
no money involved.
the biggest rattle ***** on that mustang is the rear deck panel hitting the window, this I guarentee, we found a 1" by 1" by 48" foam strip, and we simply shoved it into that crack with a penciland screwdriver.
then we had major trunk rattle, we got towels, more foam we found laying around, and so forth, and we shoved it up into the top or that, then used another layer of foam stuff that was dark dray to make it look somewhat neat, it is kinda pushed out by an inch past the metal, but it looks nice, and no shiny dynamat.
now we get NO rattle anywhere, we had problems with the doors, but we took them off when installing some nice infinity kappa coaxials, and we put some silicone glue around each and every loose plastic peice, then it was all gone.
no rattle!!! except when the system reached an excess of 143+ dB, then the trunk has a low pitch rattle, but nothing high pitch to lower sound, or dB.
hope this helps, if you'd like pictures of anything, just email the mustang owner at justin123456789@hotmail.com, he'll send you pictures soon enough if you are polite in asking.
lata.
- Thread Starter
- #5
Thanks member02..I appreciate your help!!
that's what i'm here for!
Activity
No one is currently typing a reply...
Similar threads
- Started by Mpbanshee
- Amplifiers 2
About this thread
