RAM Designs: Updated Design Thread

[funandgames 10+ year member]

That's badazzz!!

 

[RAM_Designs 5,000+ posts]

Four SA-8's in 2.75ft^3 with a 33hz tuning.

 

[crucial24 10+ year member]

sick designs man

 

[ace_800 5,000+ posts]

Gotta say that the T-Line you designed sound's louder and has better SQ with half the power I was giving my 10" sub. Thanks again

 

[RAM_Designs 5,000+ posts]

Gotta say that the T-Line you designed sound's louder and has better SQ with half the power I was giving my 10" sub. Thanks again

Nice! I'm glad it worked out well for you. It has become my most popular vid on youtube. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Canaan 10+ year member]

Four SA-8's in 2.75ft^3 with a 33hz tuning.

Ram...not to be a nay-sayer,but based on delay group...how do these 4-8's load in-vehicle?

It seems that the farthest sub is at least 36" from the interior of the vent, and the closest is ~12"...????

What vehicle was this design for?

 

[RAM_Designs 5,000+ posts]

Ram...not to be a nay-sayer,but based on delay group...how do these 4-8's load in-vehicle?It seems that the farthest sub is at least 36" from the interior of the vent, and the closest is ~12"...????

What vehicle was this design for?

This is going in a Suburban. The port actually ends just a few inches off center from between the two middle subs(you can see the vertical line at the very right of the right sub cutout.

 

[RAM_Designs 5,000+ posts]

1.3ft^3 at 34hz for some JL 6W0's

4.5ft^3 per chamber with a 34hz shared port for some old school Stroker 15's

 

[RAM_Designs 5,000+ posts]

 

[mr.tigger 10+ year member]

tryin to send u a pm but your inbox need to clear out

 

[mr.tigger 10+ year member]

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[RAM_Designs 5,000+ posts]

tryin to send u a pm but your inbox need to clear out

Sorry about that. It fills up so quickly even though I hardly use them...it's all cleared now.

 

[hybrdaccent 10+ year member]

ram have a question about the first box in this thread for three subs?

if i gave you the space i have available, could you tell me if this box would work for three 12s.

thanks in advance

 

[RAM_Designs 5,000+ posts]

ram have a question about the first box in this thread for three subs? if i gave you the space i have available, could you tell me if this box would work for three 12s.

thanks in advance

That particular box is for three 15's. Sundown SA-15's to be exact.

 

[hybrdaccent 10+ year member]

oh ok shoot was hopeing it was for 12's. you wouldent happen to have a somewhat simple desighn for 3 12's would you and how much would it cost for plans ?