Quick Wiring Question, Dual1 to 2ohm

[JeffreyG 10+ year member]

youre misunderstanding the question. Do I connect 1 wire(of the two within the 12gauge) to both the negative and positive on the sub? because if not, what would be the reasoning of connecting the two, if the other end isn't connected to anything?

 

[lostdaytomorrow 10+ year member]

I see what you mean..

I used 8 gauge power wire which makes thing simpler.

One line on the diagram is just one wire, not the two twisted together.

There's no need to have two different (+ and -) twisted together. Just rip the wire in half all the way down the length of it, it'll make it easier.

Do you understand what I mean?

 

[JeffreyG 10+ year member]

I see what you mean..
I used 8 gauge power wire which makes thing simpler.

One line on the diagram is just one wire, not the two twisted together.

There's no need to have two different (+ and -) twisted together. Just rip the wire in half all the way down the length of it, it'll make it easier.

Do you understand what I mean?

Yes, thank you. I know my question was difficult to understand, i couldnt figure out a way to phrase it right. So i just need 3 single wires, i got it.