Problem with sub grills!!!

[HannaS10 10+ year member]

ok so i am getting ready to put my subs in my box and the grill covers dont fit over the lip on my subs. It sits right on top of the lip.

The subs are the ones in my sig. Pioneer Premier TS-SW1241D 12".

These are the covers i have. You set the thin piece over the sub and screw them both in and then the other piece snaps on.

http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=260-428

Anybody know which covers will fit these subs. I need covers because their going in my truck and my seat will be against them.

Click to read more...

 

[Rich B 5,000+ posts]

You need these (also at PE) to clear the excursion of that sub......

http://www.partsexpress.com/pe/showdetl.cfm?DID=7&PartNumber=260-443

 

[HannaS10 10+ year member]

can they be screwed in the same holes with the sub or do they have to be seperate holes. Just wondering because i only have 2 inches between subs.

 

[Amokie 10+ year member]

You can place the grills diagonally so that both grills can share the same gap. Hell you could even do vertical.

I used to have one and I did it diagonally.

 

[HannaS10 10+ year member]

You can place the grills diagonally so that both grills can share the same gap. Hell you could even do vertical.
I used to have one and I did it diagonally.

duh! im so stupid. thanks a lot. these are cheaper than the other ones too!//content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif

 

[supa_c 5,000+ posts]

Get a fishman, they look the best IMO

 

[HannaS10 10+ year member]

Get a fishman, they look the best IMO

yeah but there expensive.

 

[supa_c 5,000+ posts]

It costs money to look good //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[HannaS10 10+ year member]

It costs money to look good //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

true, but there your not gonna see them until i lift up my seat.//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[supa_c 5,000+ posts]

Just use a piece of MDF then

||____||