SWEET06CAMRY
10+ year member
CarAudio.com Elite
Hey guys
Since I'm looking for an amp that would do 2,000 rms @ 2 ohms but all the good ones I found so far are in the 700 dollar range //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif
I was looking at this one but the specs seem unreal.
5500 watts, Class D Monoblock Amplifier
RMS Power Output:
4 Ohms: 2100 watts x 1
2 Ohms: 3300 watts x 1
1 Ohm: 4200 watts x 1
High Speed Digital Circuitry
Fully Regulated PWM Power Supply
Four Way Protection Circuit
1 Ohm Stable
Bridging Synchronization
System Distress Indicator
Mono Speaker Output Connector
Variable Bass Control(0 - 18 dB)
Remote Dash Mount Low Level Gain Control
Nickel Plated Heavy Duty Power & Speaker Terminals
Dimensions: 22.3"L x 11.7"W x 3"H
1-year Manufacturer's warranty
Amplifier Specifications:
Number of Channels: 1 - Mono
RMS Power (4 ohms): 2100 watts x 1 chan.
RMS Power (2 ohms): 3300 watts x 1 chan.
RMS Power (1 ohm): 4200 watts x 1 chan.
Bridged RMS Power: Not Bridgeable
Peak Power Output: N/A
Min. Impedance Unbridged: 1 ohm
Min. Impedance Bridged: Not Bridgeable
THD @ Rated RMS Power: 0.50%
Speaker Level Inputs: N/A
Amp Preamp Outputs: N/A
Built-in Crossover: Yes - LP
High-Pass Crossover: N/A
Low-Pass Crossover: 50 - 150 Hz
Subsonic Filter: 15 - 40 Hz
Signal-to-Noise Ratio: 100 dB
Channel Separation: N/A
Bass Boost: 0 - 18 dB
Bass/Gain Remote: Yes
Fan Cooled: N/A
Fuse Rating: N/A
Warranty: 1-year Manufacturer's
Is this amp this powerful ?
3,300 watts RMS @ 2 ohms for around 450 bucks ?
Please guys I need input about this amp.
Thanks.
Since I'm looking for an amp that would do 2,000 rms @ 2 ohms but all the good ones I found so far are in the 700 dollar range //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif
I was looking at this one but the specs seem unreal.
5500 watts, Class D Monoblock Amplifier
RMS Power Output:
4 Ohms: 2100 watts x 1
2 Ohms: 3300 watts x 1
1 Ohm: 4200 watts x 1
High Speed Digital Circuitry
Fully Regulated PWM Power Supply
Four Way Protection Circuit
1 Ohm Stable
Bridging Synchronization
System Distress Indicator
Mono Speaker Output Connector
Variable Bass Control(0 - 18 dB)
Remote Dash Mount Low Level Gain Control
Nickel Plated Heavy Duty Power & Speaker Terminals
Dimensions: 22.3"L x 11.7"W x 3"H
1-year Manufacturer's warranty
Amplifier Specifications:
Number of Channels: 1 - Mono
RMS Power (4 ohms): 2100 watts x 1 chan.
RMS Power (2 ohms): 3300 watts x 1 chan.
RMS Power (1 ohm): 4200 watts x 1 chan.
Bridged RMS Power: Not Bridgeable
Peak Power Output: N/A
Min. Impedance Unbridged: 1 ohm
Min. Impedance Bridged: Not Bridgeable
THD @ Rated RMS Power: 0.50%
Speaker Level Inputs: N/A
Amp Preamp Outputs: N/A
Built-in Crossover: Yes - LP
High-Pass Crossover: N/A
Low-Pass Crossover: 50 - 150 Hz
Subsonic Filter: 15 - 40 Hz
Signal-to-Noise Ratio: 100 dB
Channel Separation: N/A
Bass Boost: 0 - 18 dB
Bass/Gain Remote: Yes
Fan Cooled: N/A
Fuse Rating: N/A
Warranty: 1-year Manufacturer's
Is this amp this powerful ?
3,300 watts RMS @ 2 ohms for around 450 bucks ?
Please guys I need input about this amp.
Thanks.
