Post Your Box Specs Here:

[bcarpenterfhl 10+ year member]

**** i gotta crap load of plans i have done for people. maybe i should post them, although the people i charged to make may not appreciate it very much.

 

[djvi0lent 10+ year member]

**** i gotta crap load of plans i have done for people. maybe i should post them, although the people i charged to make may not appreciate it very much.

You got any plans for a single 15" with 5+ cubes after displacement?

 

[UndercoverPunk 5,000+ posts]

I'm finally building my first ported box and it's gonna be a big'un.
5.499^3 including port. I just want someone to check my design before I start cutting.

My my, how this design changed. That port I designed was TINY!

 

[JimJ 5,000+ posts]

nobody's going to need this, but i'll post it here anyway //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[bcarpenterfhl 10+ year member]

do those tiny little driver's really take up 0.036 cF combined?

 

[JimJ 5,000+ posts]

From the math that I did, yeah...if it's too big, I could always add some wood blocks to fill up the airspace.

 

[bcarpenterfhl 10+ year member]

when i designed you that box with 0.5 mdf and a 2 inch diamter port, i used bbp6's driver database to find out that sub's displacement and it was tiny. i can double check if you want. just post the model number and company of the subs.

 

[JimJ 5,000+ posts]

Fostex FE127E's: http://www.fostexinternational.com/docs/speaker_comp/pdf/fe127erev2.pdf

I can just add some wooden blocks if I need to.

 

[bcarpenterfhl 10+ year member]

bbp6's database gives 0.00886 cubic feet per sub, so 0.0177 cubic feet total for sub displacement.

 

[BASS OUTLAW 10+ year member]

Bbp6 doesnt work in my new PC .. it says AUTOEXE. does not support ms-dos . wtf ?

 

[bcarpenterfhl 10+ year member]

ps 10.5 * 6.5 * 18.5 = 1262.625, 1262.625/1728 = 0.73 cubic feet. thats your volume without displacements. your box as is is still tuned to 69.9 Hz though with a volume of 0.702 cubic feet, no biggie.

 

[supa_c 5,000+ posts]

Sub(s) w/ RMS: DD W6.5/150 each

Amp w/ RMS:Sony Xplod something or other/ Maby 350 if in lucky

External L x W X H:17x15x13

Wood w/ Thickness: MDF-3/4"

Chambers:1

ft. ^3 per chamber (w/out displacements):1.2 ?

ft. ^3 per chamber w/displacements (Vb):i dunno

Tuning Frequency: i think 38

Port H and W/diameter:8x1

Port length:10"

Port extension:n/a

Bracing:n/a

Pic: None for you, needs carpet first

 

[mac bleeze 10+ year member]

bumpin old thread but does anyone have any designs for dual 12 inch set up about 4 cf

 

[bcarpenterfhl 10+ year member]

as soon as i raise the money i need through box designs, i'll post all of the plans i've ever made on here.

 

[slicks5150 10+ year member]

Dimensions i just did for a single Kicker L7 (15 inch):
here you go. someone might want to verify this. but i think it's right. got it tuned to 33 Hz.

box dimensions, dont mind the "port may not fit" message. its a flaw of the program.

port dimensions

the volume displacements if anyone feels like verifying my work

what program is this that you used and where can i get it ???