-
2Participant count
-
Participant list
n2audio 5,000+ posts
OPTIDRIVEN
it would also need to double
Box/port dims can always be massaged a bit, but if you have a sub that can move some air it will need room to breathe. High volume down near the tuning frequency can cause port noise if the port area is too small.
Box/port dims can always be massaged a bit, but if you have a sub that can move some air it will need room to breathe. High volume down near the tuning frequency can cause port noise if the port area is too small.
Activity
No one is currently typing a reply...
Similar threads
While that program is pretty neat, it assumes you know the values. I was just recapping the numbers you provided. RS recommends the following...
- Started by JuiceTin
- Enclosure Design & Construction
dc audio lvl 3 lvl 4 soft parts recone kit
they kot hard af at 27 hz
- Started by prizm01
- Enclosure Design & Construction
I'm trying to do 4 18 inch resilient sound platinums in a cpillar flat wall .4 to 5 cubes per was told they like 12 to 16 inches per cube . I have...
- Started by Bass so loud it HZ
- Enclosure Design & Construction
Yeah, saw that too, was like ??? wtf! They do know there stuff, I usually just roll with it!
- Started by Justin Salaro
- Subwoofers
About this thread
New threads
-
-
Subwoofers popping when amplifier is turned off and onAll my speakers used to do this as of recent. Along with...
- Started by tonksie93
- Replies: 8
-
Help needed audio stops playingHey guys hope you are well I have a bt starsound single din...- Started by Thevaran Moodley
- Replies: 1
-
SubsWhich would be a louder sub? Audiopipe 4 stack or a sundown...- Started by Kevin Persaud
- Replies: 10
-
silly question butare there any new headunits out of the box that come with...- Started by eriknoi05
- Replies: 7