-
2Participant count
-
Participant list
n2audio 5,000+ posts
OPTIDRIVEN
it would also need to double
Box/port dims can always be massaged a bit, but if you have a sub that can move some air it will need room to breathe. High volume down near the tuning frequency can cause port noise if the port area is too small.
Box/port dims can always be massaged a bit, but if you have a sub that can move some air it will need room to breathe. High volume down near the tuning frequency can cause port noise if the port area is too small.
Activity
No one is currently typing a reply...
Similar threads
While that program is pretty neat, it assumes you know the values. I was just recapping the numbers you provided. RS recommends the following...
- Started by JuiceTin
- Enclosure Design & Construction
dc audio lvl 3 lvl 4 soft parts recone kit
they kot hard af at 27 hz
- Started by prizm01
- Enclosure Design & Construction
I'm trying to do 4 18 inch resilient sound platinums in a cpillar flat wall .4 to 5 cubes per was told they like 12 to 16 inches per cube . I have...
- Started by Bass so loud it HZ
- Enclosure Design & Construction
Yeah I feel like it was a mistake and he meant per sub. I decided to go with 13ft3 net, 186in2, 36hz to be a little on the bandwidth side.
- Started by Jonnyswboy
- General Car Audio 2
About this thread
Latest topics
-
-
-
-
Jeep center console sub install issues.
- Started by vlusardi
- Replies: 1
-
