620hpcrx 10+ year member
Senior VIP Member
Gotta get rid of some things that are sitting around the house.
1. Planet Audio PCD2485 Headunit- Plays MP3 but not WMA, 3 sets of 5v preouts, AUX input, Remote. Only thing wrong with it is the volume knob needs to be turned more than before to increase the volume but works fine turning it down, If you are confident enough you could take the face apart and clean the knob. Great unit if you need 3 outputs on a budget.
***$120+shipping***
http://img471.imageshack.us/img471/931/picture004xa3.jpg
http://img62.imageshack.us/img62/60/picture005st1.jpg
http://img87.imageshack.us/img87/2676/picture006hg5.jpg
2. Phoenix Gold Sapphire Series SA1.0x- 30wrms x2 @4ohm (12v)... 40wrms x 2 @4ohm (14.4v)... 60wrms x 2 @2ohm (12v)...80wrms x 2 @2ohm (14.4v)...120wrms @4ohm bridged (12v)...160wrms @4ohm bridged (14.4)
This is an awesome amp if you are looking to power a set of coax speakers or a small subwoofer. I used this on my Crystal speakers and it sounded so good I had to buy its bigger brother. All gold plated circuitry and high quality components.
Only things wrong are that I had to rob a speaker screw for the larger amp...but if there is a buyer I will go down to the store and find something for you...And it has a few ding, also had to repaint the endplates from minor rust. ***$50+shipping***
http://img122.imageshack.us/img122/6503/picture007un4.jpg
http://img63.imageshack.us/img63/1093/picture008kv3.jpg
http://img63.imageshack.us/img63/6613/picture009ox3.jpg
3. US Amps I/S 2080- 80wrms x 2@4ohm (14.4v)...280wrms @4ohm bridged... I am not sure of the 2ohm rating, I would guess between 120-140wrms... This amp is Like New...no scratches or nothin...just a bit dusty and that will be taken care of before shipping. I love the set screws on these amps because you don't have to have an allen wrench (I always have a hard time finding the one I use), It uses the terminal blocks with phillips set screws. Comes with the endcaps for the clean install. I need to keep this until Thursday when I get my new amp. ***$60+shipping***
http://img62.imageshack.us/img62/7002/picture010zn9.jpg
http://img62.imageshack.us/img62/603/picture012tc9.jpg
4. Blown Tsunami GXA1000d- Will put out 1200wrms if you fix it //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Needs 10 IRFZ44N transistors which I priced at $14 shipped on Ebay or $23 on PartsExpress. Here is the story on it...http://www.caraudio.com/forum/showthread.php?t=169922 Will consider any reasonable offers, otherwise I will try to fix it again. You could use the heatsink for a project...maybe remove the ugly emblem and paint, bondo the holes and repaint it up. These amps do have great heatsinks.
http://img124.imageshack.us/img124/9361/picture001gv9.jpg
http://img48.imageshack.us/img48/2350/picture002iq1.jpg
http://img97.imageshack.us/img97/774/picture003se8.jpg
-I will accept Paypal if you add 3%
-The only things Ive sold on here are an SE15 to rammx and a CL800 to Jonahdude...I have feedback on ebay under diablosminion667 but not as a seller.
1. Planet Audio PCD2485 Headunit- Plays MP3 but not WMA, 3 sets of 5v preouts, AUX input, Remote. Only thing wrong with it is the volume knob needs to be turned more than before to increase the volume but works fine turning it down, If you are confident enough you could take the face apart and clean the knob. Great unit if you need 3 outputs on a budget.
***$120+shipping***
http://img471.imageshack.us/img471/931/picture004xa3.jpg
http://img62.imageshack.us/img62/60/picture005st1.jpg
http://img87.imageshack.us/img87/2676/picture006hg5.jpg
2. Phoenix Gold Sapphire Series SA1.0x- 30wrms x2 @4ohm (12v)... 40wrms x 2 @4ohm (14.4v)... 60wrms x 2 @2ohm (12v)...80wrms x 2 @2ohm (14.4v)...120wrms @4ohm bridged (12v)...160wrms @4ohm bridged (14.4)
This is an awesome amp if you are looking to power a set of coax speakers or a small subwoofer. I used this on my Crystal speakers and it sounded so good I had to buy its bigger brother. All gold plated circuitry and high quality components.
Only things wrong are that I had to rob a speaker screw for the larger amp...but if there is a buyer I will go down to the store and find something for you...And it has a few ding, also had to repaint the endplates from minor rust. ***$50+shipping***
http://img122.imageshack.us/img122/6503/picture007un4.jpg
http://img63.imageshack.us/img63/1093/picture008kv3.jpg
http://img63.imageshack.us/img63/6613/picture009ox3.jpg
3. US Amps I/S 2080- 80wrms x 2@4ohm (14.4v)...280wrms @4ohm bridged... I am not sure of the 2ohm rating, I would guess between 120-140wrms... This amp is Like New...no scratches or nothin...just a bit dusty and that will be taken care of before shipping. I love the set screws on these amps because you don't have to have an allen wrench (I always have a hard time finding the one I use), It uses the terminal blocks with phillips set screws. Comes with the endcaps for the clean install. I need to keep this until Thursday when I get my new amp. ***$60+shipping***
http://img62.imageshack.us/img62/7002/picture010zn9.jpg
http://img62.imageshack.us/img62/603/picture012tc9.jpg
4. Blown Tsunami GXA1000d- Will put out 1200wrms if you fix it //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Needs 10 IRFZ44N transistors which I priced at $14 shipped on Ebay or $23 on PartsExpress. Here is the story on it...http://www.caraudio.com/forum/showthread.php?t=169922 Will consider any reasonable offers, otherwise I will try to fix it again. You could use the heatsink for a project...maybe remove the ugly emblem and paint, bondo the holes and repaint it up. These amps do have great heatsinks.
http://img124.imageshack.us/img124/9361/picture001gv9.jpg
http://img48.imageshack.us/img48/2350/picture002iq1.jpg
http://img97.imageshack.us/img97/774/picture003se8.jpg
-I will accept Paypal if you add 3%
-The only things Ive sold on here are an SE15 to rammx and a CL800 to Jonahdude...I have feedback on ebay under diablosminion667 but not as a seller.