planet audio p400.2s

[audiowizard 10+ year member]

you guys know anythink about this amp i was told it can run at 1 ohm ??

Click to read more...

 

[audiowizard 10+ year member]

ttt

 

[audiowizard 10+ year member]

up up up need info

 

[VQ35max 10+ year member]

Maximum Power (2 Ohm): 400watts x 2

RMS Power (4 Ohm): 200w x 2 @ 0.04% T.H.D.

Bridged Power (4 Ohm): 800w x 1

Signal to Noise Ration: 102 dB

Frequency Response: 20Hz to 20k Hz

Tri-Mode Operation

Built-In Continuously Variable Low Pass Crossover

Built-In Continuously Variable High Pass Crossover

Continuously Variable Bass Boost

Phase Adjustment: Continuously Variable from 0° to 180°

Line Output with High/Low Pass Crossover

Chrome Plated Connectors

Dimensions: 19-1/4" (L) X 2-1/4" (H) X 10-5/8" (W)

Handcrafted in U.S.A.

That's all I got. So I'm guessing officially it isn't 1ohm stable, but maybe it can.

 

[audiowizard 10+ year member]

thanks he;s some pics i hooked it up and blew my inline fuse and both on the amp ??? anything look wrong

 

[VQ35max 10+ year member]

I don't see anything obvious like a blown capacitor. Sorry I'm not an expert at amp repair, hopefully someone else has an idea as to what might be wrong. Are you saying you blew the fuses when you wired it to 1ohm, or just hooked it up at normal (2/4 ohm) operation?

 

[audiowizard 10+ year member]

i didnt even have a sub hooked up, just trying to see if it would power on and all 3 blew

 

[VQ35max 10+ year member]

Strange, I know this would seem obvious but did you accidently short the Power and Ground wires when you were hooking it up?

 

[audiowizard 10+ year member]

nope this may heave been it i had the power wire ground and remote on then i put the fuse in ...sparks alot lol ... and fuse's on a amp blew i made shur there was no pos and neg touching.

 

[audiowizard 10+ year member]

ttt got new fuse's works fine