Pioneer Premier Subwoofer

[80_Cutlass_mn 10+ year member]

My friend has recently bought a new system to go in his Ford F-150 extended cab pickup and so far he has a Pioneer DEH-P4500MP, Pioneer Rev 6x8's, and two Pioneer Premier Subwoofers....Here's the link to the subwoofers....

http://www.etronics.com/product.asp?stk_code=piotsw125dvc

These subs are going to be power by a Profile California CA1200 amplifier. The subs will be getting their recommended power so I was wondering what would be a good box for these, as in what size. The box will also need to be sealed as well. Any help is appreciated, thanx in advance.

Click to read more...

 

[80_Cutlass_mn 10+ year member]

Doesnt anyone know what would be a good box for these, otherwise im going to just go by what I know and tell him what I think would be a good box size.

 

[80_Cutlass_mn 10+ year member]

lol alright, all were wanting to know is a good size for the box as in cubic feet, all the rest I can figure on my own using various numbers and a calculator. We just need to know what a good size for airspace for these subs is. They recommend 1.5.

 

[80_Cutlass_mn 10+ year member]

Yea the thing is, were not strapped for space, it can in fact take up the entire back seat of the ford if we want it to. That is about 3 feet by 6 feet by 4 feet or so

 

[80_Cutlass_mn 10+ year member]

He said he wanted something that he could remove if he wanted to and something that would go really low. So I suggested a medium sized sealed box. Was I wrong. If we were going to make a sealed box that would just sit in something like the seat or something which is what he had planned, then what would be a good size with the 400 watts rms.

 

[80_Cutlass_mn 10+ year member]

Also the I forgot to mention that the backseat bench folds forward so you have about 2 1/2 foot from the back to the back of the front seats, about 5 1/2 feet across and up to the back window or a little above so maybe 3 feet.

 

[80_Cutlass_mn 10+ year member]

Ok new plans then. Is there any way you can get me the theile small perameters on it. I have access to Winisd pro but that sub isnt listed. I think im gonna suggest a small ported box then. It doesnt have to be huge, were not looking for anything ground pounding just something for a daily driver. Im thinkin maybe about a 3 cu ft box or less tuned to about 30 hz with two slot ports on either side of the subs sharing the same airspace. How does that sound?

 

[80_Cutlass_mn 10+ year member]

Btw we already have 3/4 in mdf and can get lots more, they come in something like 50 something x 97x 3/4 sheets around here for like 20 bux flat.