phoenix xenon wiring trick USE AT OWN RISK I AM NOT RESPONSIBLE FOR YOU DOING THIS!!!

[matqc20]

I was just wondering.. Ive got a IdMax 12'' v.3 d4.... I bought this Pg Xenon 600w amp.... the one you said this would work fine on.... It's going to be powered with some 4gauge..... Could I do this trick... and just lets say get 800-900watts out of it? Would it run fine on some 4 gauge? The sub only handles 1000watts rms.. so I wouldnt need more than 850 or so... Coul I do this thing and set it at that wattage and let it go from there?.... also... I imagine that if something goes wrong with the DEI thing and it stop working... you amp is going to go in flames.... //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

 

[SsmAnyfeSt]

same think for me....I only need about 1000-1200rms! Will it do it in 4ohm or not...and is there less chance to burn in 4ohm than in 2ohm???? cauz i'm supose to buy a used 1200.1 no warranty (500$ can) but I can have a new 600.1 for about 300$can all included on ebay. How could they know you did such a thing if your amp does burn???(i'm talking about the warranty)

I would be running a 4ohm, about 1000rms, sub!

 

[thch 10+ year member]

can u do this mod without the use of that dei?

sure. turn on the amp, then plug in the speakers a second later. done.

all you need is a suitable relay, a large resistor, and a mosfet in theory. the MOS gate acts a capacitor, and the large resistor attached to the gate acts with the capacitance to give a time delay. eventually the gate voltage will reach about 5V and the fet will be fully on and the relay will switch the speaker on.

cheap, effective. could be better.

and alternatives exist. you can rig up the mos+relay circuit to switch over after the music starts, which really isn't ideal, but the amp should live...

 

[Kickerkitty 10+ year member]

I am going to use this bombass trick on my roadmaster cool tunez amp! 5kw here I come!

 

[TypeRBass 10+ year member]

wow....just plain wow.

 

[iamamp3pimp 5,000+ posts]

I was just wondering.. Ive got a IdMax 12'' v.3 d4.... I bought this Pg Xenon 600w amp.... the one you said this would work fine on.... It's going to be powered with some 4gauge..... Could I do this trick... and just lets say get 800-900watts out of it? Would it run fine on some 4 gauge? The sub only handles 1000watts rms.. so I wouldnt need more than 850 or so... Coul I do this thing and set it at that wattage and let it go from there?.... also... I imagine that if something goes wrong with the DEI thing and it stop working... you amp is going to go in flames.... //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

thread from the dead eh?

 

[gl0ck 10+ year member]

did anyone ever try this?

 

[ravendarat 10+ year member]

You must have to bypass the fuses in this senario, at least if its going to produce 1800 RMS. The largest blade fuses availible are 40 amps, but a total of 80 amps of fuses is not capable of handling 1800 RMS.

 

[azbass 5,000+ posts]

meh

 

[xtremebassjunky 10+ year member]

this is definitely different....

and i guess it has been done by ppl who are in dB drag....

but still...makes ya:eyebrow: