aaron9060
Junior Member
Hello, I'm having trouble installing the PAC-SOEM4.
My car is a 2003 Audi A4 with a factory Bose Symphony II headunit. The factory Bose amp has been removed. I'm trying to tap into the line-out wires in the trunk that come from the headunit to provide 2 pair of RCA to an amplifier. There's one common ground for all 4 channels. So, my input will be wired, my output will be RCA, and I have to work with a common ground. Anyone have an explanation of how to go about hooking the SOEM-4 up for this task? I tried using the "Common Audio Signal Ground" schematic from the instruction manual (its the opposite of what im really trying to do), but this resulted in only some channels working; and those that did sounded low and noisy - no surprise there.
Here's a pic showing the wires i have available -
http://i.min.us/ik9JrU.jpg
i'm really banging my head on this one.. any ideas?
thanks !
aaron
My car is a 2003 Audi A4 with a factory Bose Symphony II headunit. The factory Bose amp has been removed. I'm trying to tap into the line-out wires in the trunk that come from the headunit to provide 2 pair of RCA to an amplifier. There's one common ground for all 4 channels. So, my input will be wired, my output will be RCA, and I have to work with a common ground. Anyone have an explanation of how to go about hooking the SOEM-4 up for this task? I tried using the "Common Audio Signal Ground" schematic from the instruction manual (its the opposite of what im really trying to do), but this resulted in only some channels working; and those that did sounded low and noisy - no surprise there.
Here's a pic showing the wires i have available -
http://i.min.us/ik9JrU.jpg
i'm really banging my head on this one.. any ideas?
thanks !
aaron