Omg 2 Gauge Or 4 Gauge

[indosia 10+ year member]

What size fuse does the amp have?

 

[indosia 10+ year member]

What size fuse does the amp have?

 

[indosia 10+ year member]

What size fuse does the amp have?

 

[indosia 10+ year member]

What size fuse does the amp have?

 

[indosia 10+ year member]

What size fuse does the amp have?

 

[cocoleveo7686 10+ year member]

i have that amp and i had 2 runs of 4 gauge going to a block the 0 gauge going to the amp, and i have voltage drops down to 13.0 and i have the big 0 done on a 110A alternator....once i took that out and installed KnuKoncepts 0 gauge flex cable (awesome to use) my voltage didnt drop below 13.9

 

[connersdad19 10+ year member]

why not buy some 0 gauge and just use 4 gauge reducers? thats what i am doing....reducers on ebay are cheap.....

 

[cocoleveo7686 10+ year member]

why not buy some 0 gauge and just use 4 gauge reducers? thats what i am doing....reducers on ebay are cheap.....

you dont need reducers for that amp...it fits in the amp fine...

 

[connersdad19 10+ year member]

i was referring for 0 gauge...

 

[KINGDELL91 10+ year member]

I would go with the 0ga Knu Flex Power ground wire!!!!

 

[connersdad19 10+ year member]

good wire

 

[maxxguy1 10+ year member]

1/0 fits straight into the amp with no problems

 

[brtnboarder3241 5,000+ posts]

how bout streetwires? 1/0 kit with rcas for 72$ shipped

 

[BobbyDD 10+ year member]

I used the Kicker 1/0 kit running to the back of an Expedition and still had enough left over for the big three. No RCAs though.

 

[brtnboarder3241 5,000+ posts]

ya see i was just trying to get one with rcas.. i kno i can buy them but eh.. im a lazy @$$ but still im jw if that streetwires is a good deal