Ok, i have a few amps in mind, which should i get?!

  • 1
    Participant count
  • Participant list

blaupunkt
10+ year member

Member
ok first off, my friend took back his jbl; 600.1 before i could even hook it up. I have got two blaupunkt PCwi1200 subs with 4 ohm impendance and 200w rms, 600w max. I have narrowed it down to these amps(keep in mind id like to get one amp to power both of these subs, and about 280$ budget):

JBL 600.1- 200$

PG XS2500 - 275$ ( 250 rms @ 2 ohm, so im not sure how to wire this one, i heard parallel works with these 2 ohms.)

Profile 800sx

which one works best with around 200w rms?

cya

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I think he'sasking because electricity is often compared to water to make it easier to understand. It can be helpful, but it can be misleading...
8
1K
The bigger the gauge number, the smaller the wire. 8awg would be smaller than 7awg. Yeah, go with 4awg. 7awg sounds like it must be for an...
7
2K
I found this, can it be done with snapon modis ultra scanner which i have...
11
1K
How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
154
Additinally, no need to reference "max" anything as those specs are useless. Most of know how to look at specs for a given speaker, amp, HU, etc...
2
415

About this thread

blaupunkt

10+ year member
Member
Thread starter
blaupunkt
Joined
Location
Miami, FL
Start date
Participants
Who Replied
Replies
0
Views
660
Last reply date
Last reply from
blaupunkt
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top