Noob Moments! Post em

[zack39648 10+ year member]

when you decided to buy legacy ice + your DEATH BOX and then come on CA.com and tell everyone you were louder than them.

you must remeber he

"upgraded" to a huge 900w kenwood amp cause we bashed him

 

[bass-aholic 10+ year member]

you must remeber he "upgraded" to a huge 900w kenwood amp cause we bashed him

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[stuckinok 5,000+ posts]

When bose301s came on here and told everyone that the new Mag and BM are the best sounding and built subs to come out. Yet he has never heard or seen them in person.

 

[skateboardkid 10+ year member]

I owned that amp for a long time, ran a 4" set of polks off it in my moms car. Cost me like $40 in Hawaii 15 years ago probably.

 

[RipDaJacka]

my 1st system in my Explorer i had at the time.. a 2channel Kenwood amp..prolly 800watts peak and i had 4 of the Audiobahn $35 flame basket 12s in a box me and my stepdad built.. it was a HUGEbox that took up the WHOLE cargo area..and was NOT bolted down.. well i did a pretty nice job of covering it and it was intentionally gonna be sealed but a friend had these 2in cardboard tubes.. so we put 4 "ports" using these 2in tubes and hooked it up.. onl god knows wut ohm load we wired it too.. THEN a fewweeks later I got a deal on 3 used JL 10w0's in a wedge box and hooked them up to the 2nd channel of the amp...

so

1 800w peak Kenwood 2channel

4 Audiobahn $35 flame 12s

3 jl 10w0 10

 

[RipDaJacka]

at one time I also had

2 Jensen XS 10s

on

Walmart VR3 400watt amp

and anothe noob system i had

2 RE SX 12's in a 7cuft box tuned to 12hz (accident)

on

Lanzar Vibe 4000 watt amp

 

[sks_lex 10+ year member]

Hooked up ONE voice coil of an infinity 12'' to my Dual 460 watt amp...a

 

[tommyk90 5,000+ posts]

My first setup. Circa 2001.

-2 10" MTX 4000's, the ones that circuit city sold for $100 a pair. //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

-Used MTX blue thunder pro150x2 I bought off a friend for $60. Not a bad little amp actually.

-Some shitty *** EQ that I got for free.

-One Q-logic truck box.

-And the first box I ever made. 5/8" particle board, flathead screws, two different kinds of silicone, hot glue, and wood glue. //content.invisioncic.com/y282845/emoticons/sick.gif.b1847c8dabbfeeddbcf1a78052249e10.gif

Box leaked and rattled like a mofo.

Boy have I come a long way!

 

[sneakfreak864 10+ year member]

lol my friend just got his syste done and it looks like 20times worse then the guy above me ( the box that shows the wood)

 

[Pl8er 5,000+ posts]

I was just thinking about this the other day.

My first setup LOL...I stole everything from sears (I worked there) so I had 4 10's and 3 sony 1000 watt 4 channel amps. I had them all wired in and there was a switch on the back for hi-current. So to make it "louder", I would switch that amp on to put it into 1-ohm mode ROFL.

Oh yeah, and I ran each speaker to each channel. Totally rocked ROFL

I also ran a few of the channels to 2 6X9's in the rear deck, 2 6X9's on the floor of my 89 pontiac grand prix and then to the plates in the front.

What else? Oh! I had all the power running from a fused plug inside the car.

I'm happy to report this was 11 years ago //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[GAM3OVR 5,000+ posts]

My first system considered two 12" Rockford Fosgate P2's. In a prefab box with a sony 1000 Watt Peak Amp

I bought this setup the day P2's hit the market and rolled to my high school in the parking lot banging screw.

Everybody though this white boy had beats.

I honestly though there could be nothing better then these p2's and I had the loudest system in my highschool for about 3 months.

Amp was rated for 400 RMS X 2 ohm, which is all the old p2's could handle. 200 RMS per woofer.

I then trade in my old SVC p2s for the DVC p2's and sold the sony amp.

Bought a Fosgate 800.2a and ran my p2's with fosgate power.

That **** amp overheated but it "banged"

Again I remained the shit for another 3 months, and sold my system to this softmore right before school ended in the summer.

During which time I picked up 2 10" Infinity Kappa Perfect DVQ's

And at the cartoys tent event I ended up buying my JL 500/1 for 350 bucks with a 5 year warranty.

Had this enclosure custom made.

Rolled around with those infinitys for a good year

picked up a JL 300/4

a capacitor. LOL

and 2 pairs of sony xplod 6.5" componenets.

 

[tsenfw 10+ year member]

Ahhh first system in high school in an 89 beretta!

Kenwood tape deck (45watt peak X 4 channels) and kenwood 3 way 6 X 9's and 3"'s. Complete with an aiwa portable cd player that I used an adapter for the HU! lmao

Bought a beat jenson 75watt and a RF 10 (don't even remember what model) from a friend. The GF at teh time bought me a prefab bandpass with a plexi window from a pawn shop.

Thing really didn't hit that hard at all. Within a month that shiz got stolen in front of my apartment. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif They took the sub, box, 6X9's, the cd player, and worst of all 50+ CD's!!!

That was the killer, days before burning cds, so 50 retail cds x like 15 bucks a pop.

 

[FurbiesAndBeans 10+ year member]

Thought of making a sealed box ported by cutting a square on one of the sides:crazy:

 

[miker 5,000+ posts]

I cut out two holes in the baffle for a box that was for a single sub.

I guess I was just on a roll //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[twisztdauthorit 10+ year member]

running off of this



while i was using small screws to hold it in place with metal straps.. i drilled through the gas tank //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

this was maybe 3 years ago?