New car audio/video install questions

  • 1
    Participant count
  • Participant list
Ok, so I have decided to install an amp+sub, and headrest screens in my 2013 Maxima. I have a few questions about some products, mostly dealing with power and such. First off I bought a Kinetik KHC1400R to replace my stock battery. From what I gather this should supply enough voltage for my screens, sub+amp, and nav head unit. I also have ordered a grounding+big 3 kit. I will be using a JL Audio HD750/1 amp with a 12W7, and a Carshowelectronics custom dual dvd headrest kit. My main concerns are: 1) will the battery be enough to power said components all at once? 2) will this require a higher amperage alternator, or should I use a cap for the amp? 3) are there any other things I should be considering?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Im pretty curious as well.I am wondering what all took place for the supply for the demand?
12
946
if you can read a simplistic book you can follow the directions to put together just fine. Its not rocket science. If you have questions about the...
3
543
Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
1K
Does you car have the noise cancelling mics from the factory? Usually right above the drivers door. If so, snip the wire to one of the mics to...
13
779

About this thread

bodyrocka003

Junior Member
Thread starter
bodyrocka003
Joined
Location
Fort Worth, TX
Start date
Participants
Who Replied
Replies
1
Views
586
Last reply date
Last reply from
bodyrocka003
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top