Item(s) for Sale:
SONY XM-460G. ES line, of course. Very, very hard to find regardless of condition.
Item(s) Description/Condition:
She's pristine, I just bought it brand new without the box and auditioned it for a couple weeks. Beautiful dynamic sound, very clean and powerful.
Real specs are nearly impossible to find on this but below are the specs for the 2 channel version. It's the old school SONY before they began making the power supplies that could be configured for either high voltage OR high current, like the HX series that made the same power in either mode. This one is not configurable for high voltage OR high current, instead it's rated for operation as low as 1ohm stereo and is overbuilt like quality old school amps were known to be. In fact, it's essentially two amplifiers in one heat sink as can be seen in the pics.
Known specs are 60 x 4 @ 4ohms. I would expect at least three times that at 1ohm as it had no problem driving my very demanding LMS sub without complaint.
4/3/2 channels, fused @ 2 x 30A. She runs just fine bridged @ 2ohms. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Specs update:
XM-260G
MSRP$ 500.00
60Wx2 at 4 ohms, 20-20kHz, at 0.03% THD
120Wx2 at 2 ohms, 20-20kHz, at 0.08% THD
180Wx2 at 1 ohms, 20-20kHz, at 0.1% THD
1 ohms Drive low impedance operation
240Wx1 at 4 ohms, 20-20kHz, at 0.08% THD
Discrete differential FET predriver stage
Discrete final stage w/MOSFET audio devices
Independent supply rails for predrive & final stage
Separate MOSFET power supplies for R/L channels
40Hz lo frequency EQ adjustable 0 to +10dB
Dual mode operation allows stereo & mono drive
Protection for temp, voltage & current faults
Balanced input circuit for noise isolation
Price:
$200 shipped.
Shipping and Miscellaneous Item Information:
Shipping included for CONUS.
Item Pictures:
SONY XM-460G. ES line, of course. Very, very hard to find regardless of condition.
Item(s) Description/Condition:
She's pristine, I just bought it brand new without the box and auditioned it for a couple weeks. Beautiful dynamic sound, very clean and powerful.
Real specs are nearly impossible to find on this but below are the specs for the 2 channel version. It's the old school SONY before they began making the power supplies that could be configured for either high voltage OR high current, like the HX series that made the same power in either mode. This one is not configurable for high voltage OR high current, instead it's rated for operation as low as 1ohm stereo and is overbuilt like quality old school amps were known to be. In fact, it's essentially two amplifiers in one heat sink as can be seen in the pics.
Known specs are 60 x 4 @ 4ohms. I would expect at least three times that at 1ohm as it had no problem driving my very demanding LMS sub without complaint.
4/3/2 channels, fused @ 2 x 30A. She runs just fine bridged @ 2ohms. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Specs update:
XM-260G
MSRP$ 500.00
60Wx2 at 4 ohms, 20-20kHz, at 0.03% THD
120Wx2 at 2 ohms, 20-20kHz, at 0.08% THD
180Wx2 at 1 ohms, 20-20kHz, at 0.1% THD
1 ohms Drive low impedance operation
240Wx1 at 4 ohms, 20-20kHz, at 0.08% THD
Discrete differential FET predriver stage
Discrete final stage w/MOSFET audio devices
Independent supply rails for predrive & final stage
Separate MOSFET power supplies for R/L channels
40Hz lo frequency EQ adjustable 0 to +10dB
Dual mode operation allows stereo & mono drive
Protection for temp, voltage & current faults
Balanced input circuit for noise isolation
Price:
$200 shipped.
Shipping and Miscellaneous Item Information:
Shipping included for CONUS.
Item Pictures:
Last edited by a moderator:
