Need your opinions

[Anonymous 10+ year member]

This is another board that I am considering

Here are the specs @ 13.8 volts and 1%THD

670 @ 4 ohms

1140 @ 2 ohms

2000 @ 1 ohm

Signal to noise: 100db

90% efficiency at 4 ohms

Frequency response: 15-250hz

Tell me what you think.

 

[Anonymous 10+ year member]

Disregard my last post about the pic size. I am working on getting it shrunk and posted.

 

[Anonymous 10+ year member]

 

[Anonymous 10+ year member]

Both amps will cost about the same the 2nd might be $50 less

 

[05fronty 5,000+ posts]

i like this one better

 

[Anonymous 10+ year member]

i like this one better

specs for this amp are in post #16

 

[Anonymous 10+ year member]

any other thoughts/opinions/comments?

 

[dragnix 5,000+ posts]

more than 90% of the people are going to tell you they're interested but when it comes out no one is going to buy shit

 

[Anonymous 10+ year member]

thanks for your opinion.

 

[Anonymous 10+ year member]

I forgot to mention the efficiency of the first amp which is 84% @ 4 ohms

 

[Anonymous 10+ year member]

anybody else have any comments, suggestions, opinions?

 

[JKD 10+ year member]

When will these be available?

 

[Anonymous 10+ year member]

As soon as people show interest, I can not afford to produce them and not have them sell.

 

[Anonymous 10+ year member]

Here is the low power amp I am considering.

Here are the specs

OUTPUT POWER(RMS)DC14.4V:

900W/1ohm @ THD+N=1%

1000W/1ohm @ THD+N=5%

500W/2ohm @ THD+N=1%

300W/4ohm @ THD+N=1%

THD+N:

FREQUENCY RESPONSE@-3dB(UNIT:Hz):10-200Hz

Subsonic(UNIT:Hz):15-50Hz

Signal to noise(UNIT:dB):>95dB(A Weight)

Dimension(UNIT:mm):270(L)*240(W)*45(H)

Here is the middle power amp I am considering.

Here are the specs

Out put power(THD:1%)：14.4v

Load 4Ω:500W

Load 2Ω:850W

Load 1Ω:1500W

Signal to noise ratio：100dB

Frequency response：15-250Hz

Subsonc Filter(12dB oct)：15-50Hz

Efficiency(load 4 Ohm rms at 100Hz)：85%

Total Harmonic Distortion：0.01%

FUSE：35×3A

 

[Anonymous 10+ year member]

tell me which amp you would like to see produced because i don't have the money to produce all of them. the 900 RMS will be around $200, give or take, and the 1500 will be around $300, give or take.