Need Some Help With New Electrical, Questions

[Villeza1 10+ year member]

no such thing as too mcuh //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Too much is never enough!

 

[hrtbrk1 5,000+ posts]

indeed

 

[crfrider 10+ year member]

thanks everyone for the help i may try and go with kunz power wire, im not sure how much i will need yet but i will try and get it all

 

[crfrider 10+ year member]

also do you think it would be better to buy some Knu fuse holders? instead of the cheap hong kong fuse holders on ebay, well the Knu fuse holders include up to a 150amp fuse will the hong kong ones include up to 300amp fuses, do you think it would matter between the two, thanks

 

[crfrider 10+ year member]

do you think it would be better to buy everything outright instead of tryin to just buy a dual amp kit? thanks

 

[crfrider 10+ year member]

do you think i would notice a difference between these 2 knu power wires? i was looking at the bottom one cause its cheaper but would it **** compared to the top one? thanks

http://cgi.ebay.com/KnuKonceptz-Ultra-Fleks-1-0-Power-Wire-0-Gauge-Blue_W0QQitemZ380186901256QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item5884e7bb08

http://cgi.ebay.com/KnuKonceptz-Metallic-Red-1-0-Gauge-Power-Wire-20-Feet_W0QQitemZ380186901229QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item5884e7baed

 

[zackdash 10+ year member]

30-35 ft of power should be enough to do big 3 also, and around 5 ft of ground should be good. i dont think it matters about the fuse holders, i got a hong kong one looks the exact same as the knu one(prob is)lol

i think the klmx wire would be good(since your on a budget) thats what im running.

 

[crfrider 10+ year member]

did that amp run fine with that power wire? also did you have the same hong kong fuses too? how many strands does the klm wire have? is it true 0 gauge? thanks zach, you should get your amp tommoro, and mine tuesday

 

[crfrider 10+ year member]

yea i was thinking 25 ft power wire and 15ft of ground just to be safe, also did you buy ring terminals somewhere? i found a pack on ebay of 20, im not sure if there true 0 gauge terminals though?

 

[SicAudio 5,000+ posts]

wow

just wow

 

[crfrider 10+ year member]

lol what

 

[SicAudio 5,000+ posts]

i just dont agree with some of the stuff said but i am not reading all of it to wade thru it all and correct it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[zackdash 10+ year member]

yes the amp ran fine i dont think you beable to tell a difference really. and yes i used the fuse it came with, think its a 250a? not sure how many strands, yes its true 0 guage, you can read about it here

http://www.knukonceptz.com/assets/pdf/KLM.pdf

i bought some 0 guage ring term from a local store and they were expensive$$$$

later i went to a flea market and found some for like a $1 peice or something, there not pretty though just plain copper. you might beable to find some at a hardware store...idk

Cant wait to get that amp!!!!

 

[crfrider 10+ year member]

ok yea me too but i plan on taking it to kicker right away, lol i hope everything comes ok, hope ups didnt screw them up

 

[zackdash 10+ year member]

sounds good and the amp should arrive safely