Need Some Help With New Electrical, Questions

[crfrider 10+ year member]

also since my amp has a 350 amp fuse in it, would i need to also have 350 amp fuses in each fuse holder, and would it be fine with the 200 amp isolator? having 350 amp fuses? also eventually i plan on getting a 300 amp altenator, would i also have to upgrade the isolator to like a 500 amp or would the 200 still be fine? thanks

 

[hrtbrk1 5,000+ posts]

what amp are u running again...the first 2 fuses are ok with 300...and the td batts range from 95-210 local-shipped

 

[crfrider 10+ year member]

confident in the wiring like the brand of wiring or just the install? so you think only one fuse behind the back battery before the amp is all i would need? thanks

 

[crfrider 10+ year member]

it will be a zx2500.1 also a kicker zx150.2, the 2500.1 will be on 2 ohm load

 

[Villeza1 10+ year member]

what u lost me there...lol
ok from front batt,fuse,isolator,fuse,battery,fuse,amp... the first 2 fuses are not really neccesarry if u are confident in ure wiring! as for the battery, you can get great deals on them from time to time.

X2

 

[Villeza1 10+ year member]

confident in the wiring like the brand of wiring or just the install? so you think only one fuse behind the back battery before the amp is all i would need? thanks

He means the install.

Yes

 

[crfrider 10+ year member]

do you think a 500 amp isolator would be to much?

 

[crfrider 10+ year member]

what do you think would be best between these two power wire rolls, i know they probally arent name brand but im tryin go as cheap as posible

http://cgi.ebay.com/Install-Bay-0-1-Gauge-AWG-50-wire-Power-Cable-Blue_W0QQitemZ160370695473QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2556d69d31

http://cgi.ebay.com/MONSTER-CABLE-32-1-0-GAUGE-AMP-POWER-GROUND-WIRE_W0QQitemZ300360061269QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item45eedad155

 

[hrtbrk1 5,000+ posts]

no such thing as too mcuh //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[crfrider 10+ year member]

also what would be a better choice between the two isolators?

http://cgi.ebay.com/PAC-200-PAC200-Amp-High-Current-Battery-Isolator-Relay_W0QQitemZ200418629227QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2ea9e1966b

http://cgi.ebay.com/Stinger-SGP32-200-AMP-Current-Relay-Battery-Isolator-F_W0QQitemZ220485366320QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3355f3b230

 

[hrtbrk1 5,000+ posts]

never seen the first wire before, and the second one isnt 2 bad...try knu or shok

 

[crfrider 10+ year member]

and would it be a good thing to put a kill switch on the battery like this

http://cgi.ebay.com/ebaymotors/BATTERY-MASTER-DISCONNECT-CUT-OFF-ISOLATOR-KILL-SWITCH_W0QQcmdZViewItemQQhashZitem58854cc689QQitemZ380193523337QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[zackdash 10+ year member]

x2 on knu wire

or check on here, you might be able to find some cheap

 

[zackdash 10+ year member]

x2 on knu wire

or check on here, you might be able to find some cheap

 

[Villeza1 10+ year member]

x2 on knu wireor check on here, you might be able to find some cheap

x2