Need some help with fiberglass materials

[Rkrajnov 10+ year member]

I'm gonna be building tweeter mounts onto my a-pillars. Here's what I have as a lift of what I need to get. However I notice not many people say where to get it. I'm new to this and well I'm sure I could find some of this I don't know about all of it. If you could just list where to get this (and possibly what kind to get) that would be great. Also, if there's anything I'm missing.

epoxy resin (really need something cheap but quality here.... just thinking of buying like half a gallon maybe? where to find? don't know if i trust home depot with this)

hardener (where to find? how much?

body filler (what kind? where to find? how much?)

mdf (home depot)

sandpaper (will probably get at home depot but what grains should I use?)

steel mesh? (i don't even know what this is but someone told me I might need it)

mixing containers/brushes (getting at home depot)

latex gloves (assume these are at home depot too)

cheap fabric (just using old t-shirt)

paint (really need help here? what to get? and how should I properly apply for a good finish?)

glue (what kind of glue? carpenters? or something else?)

masking tape (got it)

acetone (home depot?)

spray adhesive (where to get this?)

Click to read more...

 

[Rudy 10+ year member]

US Composites

 

[helotaxi 5,000+ posts]

That was the link I was referring to in the other thread.

 

[benzmansl65amg 10+ year member]

home depot for all

 

[bhsdriller 10+ year member]

For body filler use something like evercoat rage, really easy to sand and work with

Autobodytoolmart.com

 

[Rkrajnov 10+ year member]

would a quart of resin be enough or should I get a half gallon?

 

[bhsdriller 10+ year member]

quart should be plenty if you're only doing the tweeter mounts

I just build a set of kick panels and maybe used half a quart