Need plans......free, if possible!

[geowick07 10+ year member]

I was trying to use a kicker L7 15 sub, but my dimensions wont allow it...i only have 15 inches total vertical clearance in my trunk. so, i have to go to 2 12" L5's. my dimension's are as follows: 36in. wide x 15in. high x 26in deep(front to back). anyone have or can make these plans for me, i would appreciate it. Thanks!

Click to read more...

 

[matrxx dude 5,000+ posts]

http://www.suberwoofertools.com

 

[geowick07 10+ year member]

edit: looking for between 4-5 cubes. sorry, should have said that in the beginning!

 

[jeepintn 10+ year member]

nclosure section in the stickys and moe lester has a lot pf premade free plans, find one u can use and go with it

 

[geowick07 10+ year member]

that link didnt work......page could not load

 

[geowick07 10+ year member]

the ones in there are close....but i need the front piece to be 13.5" in high....so i can have something to screw the sub to. 13.5" plus the 2 pieces of mdf will equal my maximum height of 15"

 

[PepsiFiend69 10+ year member]

why don't you just use the 15" and upfire it?

3-4 cubes is too small for 2 l7's IMO, especially if you want any kind of low end.

EDIT: sorry ididn't realize it said 4-5. cubes

 

[geowick07 10+ year member]

cant fire up either cuz i am limited in space....basically, i am trying to keep the trunk liner, or cap, in place if i can. it is attached to the lid and moves up and down with the lid. and the clearance is only 15 inches from its underside to the trunk floor.

 

[geowick07 10+ year member]

and i said 4-5 cubes for 2 L5's, not l7's. they only require 1.75 - 3.25 cubic feet each. hence, 4-5 cubes total.

 

[PepsiFiend69 10+ year member]

gotcha.

what about 1 12" in 3.5 cubes tuned to 35 htz

i think that'd be nice and loud.

 

[PepsiFiend69 10+ year member]

and i said 4-5 cubes for 2 L5's, not l7's. they only require 1.75 - 3.25 cubic feet each. hence, 4-5 cubes total.

L7s require the same airspace accoring to kicker.com

 

[geowick07 10+ year member]

is it possible to build the box where the top doesnt sit on top of the sides, but rather inside the enclosure itself.? thus, i would eliminate 1.5 inches of height. could do that and maybe make the enclosure larger front to back?

 

[ngsm13 5,000+ posts]

I can do one right now.

nG

 

[geowick07 10+ year member]

do one what? some plans?

 

[geowick07 10+ year member]

i was planning on one L7 15". since that wont fit, i am going with 2 L5 12's.