Need help with factory system!!

[dcole302 10+ year member]

Hello all,

I have a 2009 Dodge Charger. The birthsheet says I have the 6 speaker system with the 368 watt factory amp. The six speakers would include 2 6x9's in the rear deck, 2 6x9's in the front doors, and 2 3.5's in the dash. I replaced the rear deck speakers with Pioneer 6x9's. It seems as though the door speakers are crossed over at a lower frequency because they seem to play deeper bass. I can't confirm how this factory amp is setup.. Does anyone have any insight on this?

Click to read more...

 

[calebkhill 10+ year member]

Oh... Idk.

Hope someone can point you the right way in this

 

[jrdnhsnbrg 10+ year member]

Not a clue. It might end up being easiest to bypass the whole factory amp completely.

 

[calebkhill 10+ year member]

Not a clue. It might end up being easiest to bypass the whole factory amp completely.

Thinking this too. But I'm not a stock system guy

 

[jrdnhsnbrg 10+ year member]

Thinking this too. But I'm not a stock system guy

It really depends on where the frequency is crossed at and what he wants to do here, if he wants to reproduce a frequency that's crossed outside the range the head unit puts out for that particular channel/speaker he's basically out of luck. Can't play a frequency you don't have.

 

[dcole302 10+ year member]

It really depends on where the frequency is crossed at and what he wants to do here, if he wants to reproduce a frequency that's crossed outside the range the head unit puts out for that particular channel/speaker he's basically out of luck. Can't play a frequency you don't have.

I think you may be right...I'm going to have to bypass the factory amp eventually because I can't find the specs on it and I hate not being in full control of my system.