need help picking an amp

[kaceycowan 10+ year member]

i think im going with 3 mtx 10"s

MTX RX103a Road Thunder 4 Ohm Triple 10” Inch 3 Sub Subwoofer Loaded Box Enclosure Woofer Speaker

* Brand New MTX Audio RX-103A 600W RMS 4 Ohm Road Thunder Triple 10" Sealed Enclosure

* 1200W Max Power Handling

* 600W RMS Power Handling

* 4 Ohm Operation

* Loaded w/3 10" Subwoofers

* Frequency Response: 49Hz - 150Hz

* Sensitivity: 90.5dB

* Aviation Grade Carpeting

* Sealed Design

* Dimensions: 35-1/4"(w) x 13-1/4"(h) x 5-3/4"(top depth) / 15-1/2"(bottom depth)

im not even sure what wattage on the amp to get.. or if a mono amp would work?

but i assume this would work

MTX TC6001 Thunder 1800 Watt 1ch Mono Block Sub Amp Class D TC-6001 Amplifier Subwoofer Digital

would that power 3 subs easily?

Click to read more...

 

[jkulysses 10+ year member]

I have that exact amp that was used for about a week or so that I'd sell for $150 shipped but what are those subs final ohm load cause that amp puts out close to 700 rms but only at a 2 ohm load.

 

[kaceycowan 10+ year member]

thanks for the offer.. but i am getting it for 150. um. would that amp power 3 subs? seeing that its rmx is 600 watts for 2 channel, 300 for 4.. what if its 3 subs?

 

[dB-SPL 10+ year member]

thanks for the offer.. but i am getting it for 150. um. would that amp power 3 subs? seeing that its rmx is 600 watts for 2 channel, 300 for 4.. what if its 3 subs?

If you're using three subs, just buy a mono amp. Or a nice 2 channel and bridge it. Final ohm load will depend on which subs you get.

-Bill-

 

[kaceycowan 10+ year member]

still not sure what ohm is but im sure the guy installing it for me will know. i just needed to know that that amp would work for those subs.

 

[Qbenjamin 10+ year member]

How can you expect us to suggest an amp for you, when you don't know what the final impedance load on your subs are going to be?

 

[dB-SPL 10+ year member]

You need to know what subs.. You're not going to want an amp that puts out 1000W x 1 @ 2-ohms if you have two DVC 4-ohm subs, now are you? Gotta figure out mang. ;-)

-Bill-

 

[Qbenjamin 10+ year member]

You need to know what subs.. You're not going to want an amp that puts out 1000W x 1 @ 2-ohms if you have two DVC 4-ohm subs, now are you? Gotta figure out mang. ;-)
-Bill-

LMAO at your sig........Overexposure to what, awful gear?

 

[dB-SPL 10+ year member]

LMAO at your sig........Overexposure to what, awful gear?

You like that. //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

-Bill-