need help installing motion Sensor PLZ!!

[JCivicHb 10+ year member]

ok just got my new alarm in the mail, gonna install it soon, but the motion sensor just came in a box with no instructions- i know the positive and the ground, but there are green and blue wires that say exterior and interior - where do i hook these up to on the brain? thanks

Click to read more...

 

[saj21187 10+ year member]

my guess is one is instant trigger and other is warning but not full alarm..what brand is it that might help.

 

[Shyne151 10+ year member]

who makes the alarm? what model motion sensor?

 

[JCivicHb 10+ year member]

oh yea duh-the alarm is an asianwolf astra 777

http://asianwolf.com/item.jhtml?UCIDs=1068694%7C1218563&PRID=1392167

the motion sensor is the included one

http://www.asianwolf.com/item.jhtml?UCIDs=1068694|1069136&PRID=1057682

the instant trigger and warning wires- they arent labeled on the alarm wiring diagram- when i get home i can list all the wires

 

[JCivicHb 10+ year member]

ok the wires available are-

- lock output

-unlock output

+12v

parking light output + 7a

siren output+

passenger unlock output - 500ma

auxilary 2 output -

armed output - 500ma

horn output -500ma

dome light output - 500ma

hood/trunk input -

auxilary 1 output - 500 ma

ignition +12v

ground

door trigger input+

door trigger input -

which of those wires should i hook up the motion sensor too? thanks

ive never installed an alarm but i know pretty much the basics. Its just this add on adn the glass break sensor i dont know where to hook up. thanks

 

[JCivicHb 10+ year member]

bump=- can anyone help me plz

 

[azbass 5,000+ posts]

you tap the motion sensor in to the shock sensor.. what are the colors on the wires going to the shock senson??

 

[JCivicHb 10+ year member]

well i didnt ask for opinions- but anyway i paid less than one hundred dollars for this alarm. It is one layer of security out of many that i have- all i wanted was an alarm that will possibly wake me up when someone is ****ing with my car- which this will do. Anyway- i have read on several different forums in my search for knowledge on this subject- that that is exactly what you ARENT supposed to do. anyone else have an idea?? thanks

 

[azbass 5,000+ posts]

the shock sensor on most alarms have a constant power. (red) a ground (black) a triger (most likely blue) and a warn away (green)

thats what you would tap in too, also dioed isolating the two sensors from eachother.

 

[JCivicHb 10+ year member]

i was thinking the unused trunk input- should work right??

 

[azbass 5,000+ posts]

i dont think it would work that way

 

[JCivicHb 10+ year member]

the shock sensor wires are red black blue and white

the motion sensor wires are black green blue and red

thx for your help btw

 

[azbass 5,000+ posts]

so white is probably the warn away. and blue is an instant triger.

you would use these wires. and isolate the motion sensor from the shock sensor.

 

[JCivicHb 10+ year member]

ok, so would i tap a glass break sensor into these as well?? or more than likely just the blue wire- since it only has blue black red.... thanks a lot

 

[azbass 5,000+ posts]

correct. but im not to famillar with asian wolf alarms. the best thing to do is to test teh wires. first.

but the way i told you to hook the wires up by diode isolating the sensors from eachother, is the way to go.