need help for install

[EnvEe 02 10+ year member]

if theres no visible screws on the outside..try giving it a little pull. If it starts coming off keep pulling, if you start to hear horrible noises, then stop.Most of the time you just have to pull it off.

 

[sxkicker89 10+ year member]

ok ill take a pic when i go out there to start on it

 

[sxkicker89 10+ year member]

ok so i get to the wires and everything but im so lost with this stuff.should i have some1 install it

 

[starkfu 10+ year member]

If you are unsure, take it somewhere.

 

[sxkicker89 10+ year member]

yea i think thats wt im goin to have to do sucks.like i see the colors match up an everything but i cant find this one cord to plug into.i hate to spedn 55 for some1 to install it

 

[Racerx250 10+ year member]

I did an install in an 02 mustang. v6 is it matters. The plastic shroud comes off with a pull. I think theres 4 pop off screw type things. Then undo 4 bolts/screws. Take out the old radio unplug it from the harness. And then get your new adapter harness if you bought one. can still use the old one if you choose. Then plug back in just like it was. pm me if you need more detail.

 

[Racerx250 10+ year member]

take a picture for me if you can.

 

[sxkicker89 10+ year member]

ok heres some pics of the hu.if some1 can point out wat wires go where it be nice thanks

 

[NhustlaR 10+ year member]

unplug all of the white clips from the car wiring.

 

[88Vette 10+ year member]

Battery GREEN/YELLOW

Accessory YELLOW/BLACK

Ground BLACK/GREEN

Illumination LIGHT BLUE/RED

LF Speaker (+) ORANGE/LIGHT GREEN

LF Speaker (-) LIGHT BLUE/WHITE

RF Speaker (+) WHITE/LIGHT GREEN

RF Speaker (-) DARK GREEN/ORANGE

LR Speaker (+) GRAY/LIGHT BLUE

LR Speaker (-) TAN/YELLOW

RR Speaker (+) ORANGE/RED

RR Speaker (-) BROWN/PINK

Factory wiring harness colors.

You can sign up for a free account here to get info on car wiring color codes.

http://techservices.audiovox.com/TechnicalIndex.aspx

 

[Racerx250 10+ year member]

I dont see what the problem is? Its all in the white clip as posted above. Connect the new radio into the harness you bought for like 10 bucks and plug and play.

 

[sxkicker89 10+ year member]

how do i remove the clips off the wirin

 

[Worlddre 5,000+ posts]

ok because im tired of looking at this thread and it not being answered fully i will tell you exactly how to install a radio that car....

first pull up around the shifter it will pop right off with a pull...then i dont recall off the top of my head but the plastic surrounding the radio may or may not have two screws in the bottom of it if soo remove those screws and pull th at off....then remove the 7mm bolts holding the radio in followed by the radio itself....now go to the store and metra a wiring harness for the car which IIRC is a metra 70-1771 or 70-5700 and wire that to the harness of the radio by matching the colors exactly then secure your dash kit an American international fm-k550 (dont know the metra or scosche part numbers off the top of my head) slide the cage into the dash kit and fold down the tabs on the cage to secure it into the dash...then plug the harness into the radio as well as the antenna wire...then test the radio to make sure that all functions are as you desire them....then slide the radio into the cage and reassemble the dash

and if you purchas the dash kit for the car it will have dash dissassembly instructions in it //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif