Need help designing ported box for 2 12" type r's

[05fronty 5,000+ posts]

i use one port on my 2 12's

 

[Deeper_shades 10+ year member]

ty TJ //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

no, thank you! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[SicAudio 5,000+ posts]

anytime lemme know how you like it everyone so far out of 1000's of people have loved that design for type r subs lolz

 

[asager203]

Thanks guys im going to make the box tomorrow, you guys were a great help!

 

[SicAudio 5,000+ posts]

make a log and let everyone know how well the "free" design worked out //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

i need to start charging for box designs lolz

 

[jchancellortool 10+ year member]

Would you recomend that design for the R's even if you had room for 4 or 5 cubes?

 

[Jaredturp 10+ year member]

http://img35.imageshack.us/my.php?image=44cubes32hz66sqin7et.png

All anyone needs for a type r enclosure ^^^^^^^^

 

[Jaredturp 10+ year member]

Double

 

[SicAudio 5,000+ posts]

Would you recomend that design for the R's even if you had room for 4 or 5 cubes?

if you want to push 1kw or more yes if no more than 800-1000 maybe 4.5 cubes per pair at the most depends what you want. i have done many dif ways and 3.5 per pair on 2kw at 38hz has always sounded the best and been the loudest overall.

 

[BoomBoxTegra95]

I used your design to start building a box for my type r's. But it looks too small.....this can't be right

 

[Jaredturp 10+ year member]

Which design?

 

[BoomBoxTegra95]

I aint no drafter, but I drew up a sketch for you //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I forgot the height on the vent, its 12.5

i used this one, and it just seems to small for these subs. This is for the swd-1242's right???

 

[Jaredturp 10+ year member]

I'm too lazy to calculate it.. what's the internal?

 

[RAM_Designs 5,000+ posts]

I'm too lazy to calculate it.. what's the internal?

3.56ft^3 before any displacement, nowhere near enough for 12's...still kinda small for 10's. Not to mention it isn't designed right anyways. When the port splits in the back, you need to have half of the wider part of the port go each way, so 1.75" from the back wall for each port, then funneling into a 3.5" port.

 

[Jaredturp 10+ year member]

Use the design I sent you a few months back ^^^ it's up there somewhere..