You sure you want to do a side firing? Is that what Kicker told you?
Need box design - 10" SoloX Ported
- Thread starter richierich75
- Live activity
- Replies 74
- Views 3K
- Thread Starter
- #47
i was taking one amp to one vc and the other amp to the other vc.
- Thread Starter
- #48
yeah that is what they told me. there isn't enough clearance to have it front or rear and he didn't recommend to have it fire downward, but that may be a possibility... seeing as the space of the bottom is larger but i think that piece will need to be raised a min of 6 inches for firing which will increase the height of the box and move the port to fire out of the side...//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif
I came up with this but I'm not sure how well it will work. The sub will barely fit on the bottom of the side anyways and will probably need to be recessed. Are these the absolute largest dimensions you can go? What about a sealed setup firing backwards?
This is aaproxximately 2.5 cf @ 36 hz, by the way.
This is aaproxximately 2.5 cf @ 36 hz, by the way.
That is real iffy IMO I would look at running something else.
I agree. Maybe save this sub for another car (hint, not a "family" car).
Brian nice though for working with those strict dimensions.
BuckyBoy
10+ year member
CarAudio.com Elite
Brian, the front can extend up 16" with the depth being 12.75" and then it angles towards the 9" depth. I have been working on a design, but I don't know how it's going to turn out. See what you come up with considering the difference.
- Thread Starter
- #54
I came up with this but I'm not sure how well it will work. The sub will barely fit on the bottom of the side anyways and will probably need to be recessed. Are these the absolute largest dimensions you can go? What about a sealed setup firing backwards?
This is aaproxximately 2.5 cf @ 36 hz, by the way.
Brian, looks good - on the front of the box it actually goes up approx 16" then angles back to be 9" on top. This will give it more clearance for mounting.
The only dimension that can increase would be the height - which could be + 2"-3" max.
- Thread Starter
- #55
great, now i have to buy another car...
hehehe- Thread Starter
- #56
Brian - any thoughts?
I didnt pay attention to your exact dimensions but I dont like the woofer position on that box at all. Can u lose the 3rd row? Or maybe run 2 or 3 10's sealed ?
- Thread Starter
- #58
No, losing the 3rd row is not an option. I really want to be able to use this sub. I know it is a funky design that hasn't really been tested yet, but it may work out. I may be able to do the 10's if the solo doesn't work out, but I would like to still have it ported. With that being said, I think the 10's would be able to be down firing without any problems.
Yeah, here's a thought //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif :
Haven't done any calcs on it yet and I know there's not enough clearance for the magnet, but this is something along the lines of what I was thinking.
- Thread Starter
- #60
I am not dead set on the side firing, but like you said the clearance for the magnet is an issue.... but I dig the way you thinkYeah, here's a thought //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif :
Haven't done any calcs on it yet and I know there's not enough clearance for the magnet, but this is something along the lines of what I was thinking.
Activity
No one is currently typing a reply...
Similar threads
- Started by Ridgeline14
- Enclosure Design & Construction
- Started by West1
- Enclosure Design & Construction 2
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 74
- Views
- 3,190
- Last reply date
- Last reply from
- richierich75
