Need advise on two 12" subs

  • 4
    Participant count
  • Participant list

fire919
10+ year member

Member
I have 2 american bass ph4000md and i want to run each at 1ohm

the enclosure i have is as below. my budget is no more than 300 per sub. and i would like as much sq/spl i can get for that price.

☞ 5/8" HDIP

☞ Height 14.50" x Width 29.50" x Depth 19.3/4"

☞ 1.90 Cubic Ft. Air Space ( per side )

☞ Woofer Mounting Depth x 19"

☞ Tuned at 38 Hz

AMP specs

1 Ohm Stable Class D Mono Block Amplifier

Rms at 1 Ohm: 2000 Watts

MAX at 1 Ohm: 4000 Watts

Frequency Response: 10Hz ~ 220Hz

Input Level: 5V ~ 0.2V

Variable Subsonic: 10Hz ~ 50Hz

Variable Low Pass Filter: 40Hz ~ 220Hz

Switchable Bass Boost: 0dB, 6dB, 12dB

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
114
You can just change the surround if the cone is not broken. This picture shows all the measurements you must make.
1
757
While most Asian and African markets will identify Honda's small hatchback as the Jazz model, most Western regions will know the same model as the...
2
97
The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
2
434
Yup , the dsp should have input sections, it may have one for sub? Hu to dsp. Dsp to amps, amps to speakers. Probably help you to draw this all...
2
336

About this thread

fire919

10+ year member
Member
Thread starter
fire919
Joined
Location
the bronx,NY
Start date
Participants
Who Replied
Replies
4
Views
631
Last reply date
Last reply from
fire919
1715565471722.png

Doxquzme

    May 12, 2024
  • 0
  • 0
IMG_5880.jpeg

Brendon Jenness

    May 11, 2024
  • 0
  • 0

New threads

Top