Need advice on port area

[mugen08 10+ year member]

I have a cv vmax 12 that I will be running at its max of 500wrms

I want it to dig low but not necessarily have great range (I will be running some id ctx 6.5 mids for 60hz up)

So I'm hoping to tune somewhere around 30-32 hz and get the most output possible without setting my lpf lower than 60 or so

Thanks, Moog

BTW it will be a round port and I prob. won't flare it

Click to read more...

 

[DNick454 10+ year member]

Since port area is largely determined by the box's internal volume, that might be a good piece of information to know //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[phemps 10+ year member]

Since port area is largely determined by the box's internal volume, that might be a good piece of information to know //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

what he said

 

[mugen08 10+ year member]

prob 1.5 cube

 

[plugitin 5,000+ posts]

12-16 sq inches per cube for a slot port...

8-12 sq inches per cube for aeros